SIMULIA Technology Days - e-Machine Workshop Series - Agenda

Tuesday, October 21, 2025

Dassault Systèmes Paris Campus | 10, rue Marcel Dassault Paris Campus | 78140 Vélizy-Villacoublay | France

9:00 AM - 4:00 PM CEST

Agenda for Velizy, France | EuroWest

Event Language: French | Doors Open at 9:00 am | Presentations Start: 9:30 am

9:00 AM - 9:30 PM CEST Welcome

Registration & Welcome Coffee

9:30 AM - 10:00 AM CEST

Welcome & Introduction | Dassault Systèmes

10:00 AM - 12:00 PM CEST

ELECTROMAGNETIC DESIGN

10:00 AM - 10:45 AM CEST

Extraction of Electromagnetic KPIs | Dassault Systèmes

This presentation covers key aspects of e-machine optimization, including identifying relevant KPIs and leveraging the MODSIM approach to use parametric CAD mod...

10:45 AM - 11:30 AM CEST

Extraction of 3D Parasitic Effects | Dassault Systèmes

This presentation highlights various methods for identifying parasitic 3D effects that are not captured in traditional 2D finite element analysis (FEA), using a...

11:30 AM - 12:00 PM CEST

Considering Thermal Effects | Dassault Systèmes

Building on concepts presented in earlier talks, this session will demonstrate how to analyze temperature hotspots and assess the performance of the cooling sys...

12:00 PM - 1:00 PM CEST

Lunch

1:00 PM - 2:15 PM CEST

NVH CONFORMAL MOTOR AND E-DRIVE DESIGN | PART 1

1:00 PM - 1:45 PM CEST

E-NVH Concept & Preliminary Design using SIMULIA Manatee | Dassault Systèmes

This presentation illustrates the assessment of noise and vibrations of electric drives induced by electromagnetic forces with Manatee. A live simulation is fir...

1:45 PM - 2:15 PM CEST

Motor System Design — Workflow Integration | Dassault Systèmes

This presentation focuses on the exchange of electromagnetic quantities with both system-level simulations in Dymola and multibody dynamics in Simpack. It will...

2:15 PM - 2:45 PM CEST

Coffee Break

2:45 PM - 3:25 PM CEST

NVH CONFORMAL MOTOR AND E-DRIVE DESIGN | PART 2

2:45 PM - 3:05 PM CEST

Subsystem Reduced Order Modeling in Detailed E-Drive Design | Dassault Systèmes

The presentation illustrates the integration of various physical principles when optimizing electrical machines. It explains how to encapsulate the behavior of...

3:05 PM - 3:25 PM CEST

Non-Parametric Shape Optimization of the Motor | Dassault Systèmes

The presentation focuses on the optimization of electrical machines using non-parametric methods. It defines these optimization techniques and outlines the proc...

3:25 PM - 3:55 PM CEST

MODSIM (MODeling & SIMulation)

3:25 PM - 3:55 PM CEST

MODSIM Driven E-Motor Design on 3DEXPERIENCE | Dassault Systèmes

Modeling and Simulation (MODSIM) bridges the traditional gap between CAD/Design and Simulation by introducing a unified data model on the 3DEXPERIENCE platform....

3:55 PM - 4:00 PM CEST

End of the Event

Thursday, October 30, 2025

Dassault Systèmes Milano | Segrate Segreen Business Park | Via San Bovio 3 | 20054 Segrate, MI | Italy

9:00 AM - 5:00 PM CET

Agenda for Milan, Italy | EuroMed

Event Language: English | Doors Open at 9:00 am | Presentations Start: 9:30 am

9:00 AM - 9:30 AM CET Welcome

Registration & Welcome Coffee

9:30 AM - 10:00 AM CET

Welcome & Introduction | Dassault Systèmes

10:00 AM - 12:00 PM CET

ELECTROMAGNETIC DESIGN

10:00 AM - 10:40 AM CET

Extraction of Electromagnetic KPIs | Dassault Systèmes

This presentation covers key aspects of e-machine optimization, including identifying relevant KPIs and leveraging the MODSIM approach to use parametric CAD mod...

10:40 AM - 11:20 AM CET

Extraction of 3D Parasitic Effects | Dassault Systèmes

This presentation highlights various methods for identifying parasitic 3D effects that are not captured in traditional 2D finite element analysis (FEA), using a...

11:20 AM - 11:40 AM CET

Considering Thermal Effects | Dassault Systèmes

Building on concepts presented in earlier talks, this session will demonstrate how to analyze temperature hotspots and assess the performance of the cooling sys...

11:40 AM - 12:00 PM CET

CST Studio as a Tool for Electric Motorcycle Prototype Development | Polimi Motorcycle Factory

Polimi Motorcycle Factory is the Motostudent team from Politecnico di Milano. It brings together more than 100 students who share the same goal: innovating and...

12:00 PM - 1:00 PM CET

Lunch

1:00 PM - 2:15 PM CET

NVH CONFORMAL MOTOR AND E-DRIVE DESIGN | PART 1

1:00 PM - 1:45 PM CET

E-NVH Concept & Preliminary Design using SIMULIA Manatee | Dassault Systèmes

This presentation illustrates the assessment of noise and vibrations of electric drives induced by electromagnetic forces with Manatee. A live simulation is fir...

1:45 PM - 2:15 PM CET

Motor System Design — Workflow Integration | Dassault Systèmes

This presentation focuses on the exchange of electromagnetic quantities with both system-level simulations in Dymola and multibody dynamics in Simpack. It will...

2:15 PM - 2:45 PM CET

Coffee Break

2:45 PM - 3:25 PM CET

NVH CONFORMAL MOTOR AND E-DRIVE DESIGN | PART 2

2:45 PM - 3:05 PM CET

Subsystem Reduced Order Modeling in Detailed E-Drive Design | Dassault Systèmes

The presentation illustrates the integration of various physical principles when optimizing electrical machines. It explains how to encapsulate the behavior of...

3:05 PM - 3:25 PM CET

Non-Parametric Shape Optimization of the Motor | Dassault Systèmes

The presentation focuses on the optimization of electrical machines using non-parametric methods. It defines these optimization techniques and outlines the proc...

3:25 PM - 3:55 PM CET

MODSIM (MODeling & SIMulation)

3:25 PM - 3:55 PM CET

MODSIM Driven E-Motor Design on 3DEXPERIENCE | Dassault Systèmes

Modeling and Simulation (MODSIM) bridges the traditional gap between CAD/Design and Simulation by introducing a unified data model on the 3DEXPERIENCE platform....

3:55 PM - 4:00 PM CET

Short Break

4:00 PM - 5:00 PM CET Workshop

Workshop

*For the Hands-On Workshop, please bring your own laptop. You will receive an evaluation license.

4:00 PM - 5:00 PM CET

Manatee Hands-On Workshop* | Dassault Systèmes

The workshop focuses on the set up of an e-NVH simulation in Manatee software through a realistic demonstration case. The multiphysic simulation is used in prel...

4:00 PM - 5:00 PM CET

Manatee Hands-On Workshop* | Dassault Systèmes - Copied

The workshop focuses on the set up of an e-NVH simulation in Manatee software through a realistic demonstration case. The multiphysic simulation is used in prel...

5:00 PM - 5:05 PM CET

End of the Event

Wednesday, November 12, 2025

Dassault Systèmes Darmstadt | Bad Nauheimer Strasse 19 | 64289 Darmstadt | Germany

9:00 AM - 5:00 PM CET

Agenda for Darmstadt, Germany | EuroCentral

Event Language: English | Doors Open at 9:00 am | Presentations Start: 9:30 am

9:00 AM - 9:30 AM CET Welcome

Registration & Welcome Coffee

9:30 AM - 10:00 AM CET

Welcome & Introduction | Dassault Systèmes

10:00 AM - 11:45 AM CET

ELECTROMAGNETIC DESIGN

10:00 AM - 10:40 AM CET

Extraction of Electromagnetic KPIs | Dassault Systèmes

This presentation covers key aspects of e-machine optimization, including identifying relevant KPIs and leveraging the MODSIM approach to use parametric CAD mod...

10:40 AM - 11:20 AM CET

Extraction of 3D Parasitic Effects | Dassault Systèmes

This presentation highlights various methods for identifying parasitic 3D effects that are not captured in traditional 2D finite element analysis (FEA), using a...

11:20 AM - 11:45 AM CET

Considering Thermal Effects | Dassault Systèmes

Building on concepts presented in earlier talks, this session will demonstrate how to analyze temperature hotspots and assess the performance of the cooling sys...

11:45 AM - 12:45 PM CET

Lunch

12:45 PM - 2:00 PM CET

NVH CONFORMAL MOTOR AND E-DRIVE DESIGN | PART 1

12:45 PM - 1:30 PM CET

E-NVH Concept & Preliminary Design using SIMULIA Manatee | Dassault Systèmes

This presentation illustrates the assessment of noise and vibrations of electric drives induced by electromagnetic forces with Manatee. A live simulation is fir...

1:30 PM - 2:00 PM CET

Motor System Design — Workflow Integration | Dassault Systèmes

This presentation focuses on the exchange of electromagnetic quantities with both system-level simulations in Dymola and multibody dynamics in Simpack. It will...

2:00 PM - 2:30 PM CET

Coffee Break

2:30 PM - 3:20 PM CET

NVH CONFORMAL MOTOR AND E-DRIVE DESIGN | PART 2

2:30 PM - 2:55 PM CET

Subsystem Reduced Order Modeling in Detailed E-Drive Design | Dassault Systèmes

The presentation illustrates the integration of various physical principles when optimizing electrical machines. It explains how to encapsulate the behavior of...

2:55 PM - 3:20 PM CET

Non-Parametric Shape Optimization of the Motor | Dassault Systèmes

The presentation focuses on the optimization of electrical machines using non-parametric methods. It defines these optimization techniques and outlines the proc...

3:20 PM - 3:50 PM CET

MODSIM (MODeling & SIMulation)

3:20 PM - 3:50 PM CET

MODSIM Driven E-Motor Design on 3DEXPERIENCE | Dassault Systèmes

Modeling and Simulation (MODSIM) bridges the traditional gap between CAD/Design and Simulation by introducing a unified data model on the 3DEXPERIENCE platform....

3:50 PM - 4:00 PM CET

Short Break

4:00 PM - 5:00 PM CET Workshop

Workshop

*For the Hands-On Workshop, please bring your own laptop. You will receive an evaluation license.

4:00 PM - 5:00 PM CET

Manatee Hands-On Workshop* | Dassault Systèmes

The workshop focuses on the set up of an e-NVH simulation in Manatee software through a realistic demonstration case. The multiphysic simulation is used in prel...

5:00 PM - 5:05 PM CET

End of the Event

Tuesday, November 18, 2025

Dassault Systèmes Nottingham | Strelley Hall. | Main Street. Strelley | Nottingham NG8 6PE | United Kingdom

9:00 AM - 5:00 PM CET

Agenda for Nottingham, UK | EuroNorth

Event Language: English | Doors Open at 9:00 am | Presentations Start: 9:30 am

9:00 AM - 9:30 AM CET Welcome

Registration & Welcome Coffee

9:30 AM - 10:00 AM CET

Welcome & Introduction | Dassault Systèmes

10:00 AM - 11:40 AM CET

ELECTROMAGNETIC DESIGN

10:00 AM - 10:40 AM CET

Extraction of Electromagnetic KPIs | Dassault Systèmes

This presentation covers key aspects of e-machine optimization, including identifying relevant KPIs and leveraging the MODSIM approach to use parametric CAD mod...

10:40 AM - 11:20 AM CET

Extraction of 3D Parasitic Effects | Dassault Systèmes

This presentation highlights various methods for identifying parasitic 3D effects that are not captured in traditional 2D finite element analysis (FEA), using a...

11:20 AM - 11:40 AM CET

Considering Thermal Effects | Dassault Systèmes

Building on concepts presented in earlier talks, this session will demonstrate how to analyze temperature hotspots and assess the performance of the cooling sys...

11:40 AM - 12:00 PM CET

Customer Presentation

12:00 PM - 1:00 PM CET

Lunch

1:00 PM - 2:15 PM CET

NVH CONFORMAL MOTOR AND E-DRIVE DESIGN | PART 1

1:00 PM - 1:45 PM CET

E-NVH Concept & Preliminary Design using SIMULIA Manatee | Dassault Systèmes

This presentation illustrates the assessment of noise and vibrations of electric drives induced by electromagnetic forces with Manatee. A live simulation is fir...

1:45 PM - 2:15 PM CET

Motor System Design — Workflow Integration | Dassault Systèmes

This presentation focuses on the exchange of electromagnetic quantities with both system-level simulations in Dymola and multibody dynamics in Simpack. It will...

2:15 PM - 2:45 PM CET

Coffee Break

2:45 PM - 3:25 PM CET

NVH CONFORMAL MOTOR AND E-DRIVE DESIGN | PART 2

2:45 PM - 3:05 PM CET

Subsystem Reduced Order Modeling in Detailed E-Drive Design | Dassault Systèmes

The presentation illustrates the integration of various physical principles when optimizing electrical machines. It explains how to encapsulate the behavior of...

3:05 PM - 3:25 PM CET

Non-Parametric Shape Optimization of the Motor | Dassault Systèmes

The presentation focuses on the optimization of electrical machines using non-parametric methods. It defines these optimization techniques and outlines the proc...

3:25 PM - 3:55 PM CET

MODSIM (MODeling & SIMulation)

3:25 PM - 3:55 PM CET

MODSIM Driven E-Motor Design on 3DEXPERIENCE | Dassault Systèmes

Modeling and Simulation (MODSIM) bridges the traditional gap between CAD/Design and Simulation by introducing a unified data model on the 3DEXPERIENCE platform....

3:55 PM - 4:00 PM CET

Short Break

4:00 PM - 5:00 PM CET Workshop

Workshop

*For the Hands-On Workshop, please bring your own laptop. You will receive an evaluation license.

4:00 PM - 5:00 PM CET

Manatee Hands-On Workshop* | Dassault Systèmes

The workshop focuses on the set up of an e-NVH simulation in Manatee software through a realistic demonstration case. The multiphysic simulation is used in prel...

5:00 PM - 5:05 PM CET

End of the Event