SIMULIA EuroMed Conference 2025 - Agenda

Tuesday, July 1, 2025

Chiostro

9:45 AM - 10:30 PM CEST

Registration & Breakfast, Sponsor Exhibit Area & 3DEXPERIENCE Playground Open

Aula 1

10:30 AM - 10:45 AM CEST Plenary

Welcome & Opening Remarks

Introduction to the concept and highlights of this conference, and welcoming the SIMULIA Champions to the stage.

Aula 1

10:45 AM - 11:30 AM CEST Plenary

Simulation Brand Insights | Dassault Systèmes

The SIMULIA brand was established 20 years ago as a central component of Dassault Systèmes' mission of providing businesses and individuals with science-based v...

Aula 1

11:30 AM - 12:15 PM CEST Plenary

MODSIM: The Importance of Being Unified | Dassault Systèmes

Modelling and simulation on 3DEXPERIENCE platform are driven by MODSIM — a unique unified modelling and simulation data model. This may seem like an obscure det...

Aula 1

12:15 PM - 12:45 PM CEST Plenary

Coupled Workflows for Thermomechanical and Oxidative Aging Analysis in Elastomers | Endurica Europe

The temperature distribution and history in elastomeric structures are important for several reasons. Temperature directly affects the current viscoelastic prop...

Chiostro

12:45 PM - 2:00 PM CEST Breaks

Lunch Break | Group Photo

Aula 1

2:00 PM - 6:00 PM CEST Breakout session

Track 1 | Structures

Aula 1

2:00 PM - 2:25 PM CEST Breakout session

Direct Electrical Heating Cable Positioning Study for Subsea Pipelines – FEM Analysis and Optimization | Saipem

DEH cables are installed on subsea pipelines that are susceptible to hydrate formation, typically operating under high pressure and low temperature conditions....

Aula 1

2:25 PM - 2:50 PM CEST Breakout session

Thermo-Poro-Mechanical Modeling for Fault Stability Evaluation using Abaqus | ENI

In the context of greenhouse gas mitigation and transition towards renewable energy, the deployment of CarbonCapture and Storage (CCS) and geothermal energy sys...

Chiostro

2:50 PM - 3:05 PM CEST Breaks

Break | Coffee, Tea & Snacks

Aula 1

3:05 PM - 3:40 PM CEST Breakout session

Suspension Knuckle Analysis: Model Creation Optimization with 3DX Platform | Ferrari & Dassault Systèmes

During the design phase of a suspension knuckle, frequent geometrical changes occur due to the iterative nature of the development stages of the component.These...

Aula 1

3:40 PM - 4:00 PM CEST Breakout session

Rubber components FE model: virtual validation and implementation in tire-soil interactions for offroad vehicles

The purpose of the document is to illustrate some approaches to rubber FE model creation and durability evaluation through two industrial case studies as well a...

Aula 1

4:00 PM - 4:20 PM CEST Breakout session

Analysis of Helicopter Component with Hyperelastic Material Characterization | Capgemini Italia

Rubber materials are increasingly used in industrial fields such as automotive and aerospace. The main approach to simulating the behavior of rubber components...

Chiostro

4:20 PM - 4:50 PM CEST Breaks

Break | Coffee, Tea & Snacks

Aula 1

4:50 PM - 5:15 PM CEST Breakout session

Crashworthiness Desing of eVTOL using Efficient Computational Tools | Politecnico di Milano

Future electrical Vertical Take-Off and Landing aircraft introduce new challenges in the design of crashworthiness vehicles, such as extremely lightweight struc...

Aula 1

5:15 PM - 5:40 PM CEST Breakout session

Design and Optimization Integrated Approach for Robotic Welding Processes of Car Chassis | Università degli Studi di Modena e Reggio Emilia

The 3DEXPERIENCE allows for the adoption of model-based methodologies for the integrated design of products and processes. This approach proves to be particular...

Aula 1

5:40 PM - 6:00 PM CEST Breakout session

Simulation-Driven Innovation in Life Science: From Pancreatic Tissue to Bone Regeneration | University of Florence

This work showcases the application of the 3DEXPERIENCE platform and Abaqus in two innovative Life Sciences research areas. The first study focuses on the mecha...

Sala del Chiostro

2:00 PM - 6:05 PM CEST Breakout session

Track 2 | Electromagnetics

Sala del Chiostro

2:00 PM - 2:25 PM CEST Breakout session

EMC/EMI Simulations and Analysis of Automotive Components using CST | Rimac Technology

All electronic devices on the market must operate intheir intended environment without interfering with other components.Regulatory bodies impose requirementsto...

Sala del Chiostro

2:25 PM - 2:50 PM CEST Breakout session

Predicting and Verifying the Electromagnetic Compatibility of LEO and GEO Satellites | Thales Alenia Space

Due to design and mission constraints, Low Earth Orbit (LEO) and Geostationary Orbit (GEO) satellites are complex systems, and ensuring their performance requir...

Chiostro

2:50 PM - 3:05 PM CEST Breaks

Break | Coffee, Tea & Snacks

Sala del Chiostro

3:05 PM - 3:30 PM CEST Breakout session

Millimeter Wave Grin Lens in PBC Technology | Huawei

A gradient-index (GRIN) lens based on PCB technology uses a spatially varying refractive index, achieved through printed circuit board fabrication, to...

Sala del Chiostro

3:30 PM - 3:55 PM CEST Breakout session

Simulation-Driven Design of a Battery-Less UHF Sensor for Monitoring EV Bearings | Radio6ense

Electric vehicles are pushing the boundaries of engineering, especially when it comes to monitoring key components like motor bearings, which operate u...

Sala del Chiostro

3:55 PM - 4:20 PM CEST Breakout session

Efficient Simulation of Tandem-Arrayed Mosaic Antennas with Advanced FSS Structures | Andrew and Amphenol company

This presentation focuses on the efficient electromagnetic simulation of Andrew’s Mosaic antenna platform, which features tandem-placed antenna arrays...

Chiostro

4:20 PM - 4:50 PM CEST Breaks

Break | Coffee, Tea & Snacks

Sala del Chiostro

4:50 PM - 5:15 PM CEST Breakout session

Use of CST's Hybrid Solver for Pattern Deformation Analysis of Antennas Installed on Electrically Large Structures | ELT Group

Antennas used in the Aerospace and Defense industry are often installed on structures that are electrically large with respect to the wavelength, such a...

5:15 PM - 5:40 PM CEST Breakout session

Matching between Analytical and Computational Electromagnetic Techniques for the Design of Leaky-Wave Antennas | CNR, IMM and Sapienza University of Rome, DIET

Leaky-Wave Antennas (LWAs) are a cost-effective, efficient solution to the longstanding problem of a simultaneously low-profile and highly directive rad...

Sala del Chiostro

5:40 PM - 6:05 PM CEST Breakout session

Electromagnetic Simulations of Space-Time Varying Metamaterials and Metasurfaces | RomaTre University

In this talk, we present our recent results on how to simulate space-time varying metamaterials and metasurfaces by using commercial full-wave numerical softwa...

Aula 7

2:00 PM - 6:05 PM CEST Breakout session

Track 3 | Fluids

Aula 7

2:00 PM - 2:25 PM CEST Breakout session

Aeroacoustics Simulation of a High-Subsonic Maglev Train: Far Field Noise and Sources Characterization

Aula 7

2:25 PM - 2:50 PM CEST

Validation of Brake Cooling Cycles on a Sports Car | Dassault Systèmes

This presentation outlines the validation of brake cooling simulations performed with the PowerFlow Native Thermal Solver, with the goal of correlating results...

Chiostro

2:50 PM - 3:05 PM CEST Breaks

Break | Coffee, Tea & Snacks

Aula 7

3:05 PM - 3:30 PM CEST Breakout session

Adding Detail to Interior Windnoise Models Using wave6 Together with PowerFLOW | General Motors

Interior noise in vehicles affects passenger comfort and perceived quality. At higher vehicle speeds windnoise is often one of the dominant contributors to inte...

Aula 7

3:30 PM - 3:55 PM CEST Breakout session

Understanding Axial Fan Noise Generation Through Lattice-Boltzmann Simulations | Politecnico di Torino

"Axial fan noise is a significant concern across various industries, including the automotive sector. Accurately predicting this noise using low-fidelity method...

Aula 7

3:55 PM - 4:20 PM CEST Breakout session

Fluid-Structure-Interaction on Axial Fans | Dassault Systèmes

Axial fans, widely used for cooling purposes in the automotive industry, despite their efficiency, face high structural loads, which can degrade performance and...

Chiostro

4:20 PM - 4:50 PM CEST Breaks

Break | Coffee, Tea & Snacks

Aula 7

4:50 PM - 5:15 PM CEST Breakout session

Electric Motorcycle Battery Pack Cooling Duty Cycle | Polimi Motorcycle Factory

Polimi Motorcycle Factory is the Motostudent team from Politecnico di Milano. It brings together more than 100 students who share the same goal: innova...

Aula 7

5:15 PM - 5:40 PM CEST Breakout session

Aerodynamic Study of a Sports Motorbike | Università degli Studi di Modena e Reggio Emilia

The aerodynamics of motorbikes is an area of growing interest among racing teams, yet publicly available data on their aerodynamic characteristics remai...

Aula 7

5:40 PM - 6:00 PM CEST Breakout session

3D Fluid-Structure Interaction Simulation for Hydrofoil Performance Evaluation | Politecnico di Milano

"Hydrofoils are wing-shaped submerged structures designed to lift a vessel's hull above the water's free surface during motion, thereby reducing hydrodynamic dr...

Aula 17

2:00 PM - 6:05 PM CEST Breakout session

Track 4 | Multibody Dynamics

Aula 17

2:00 PM - 2:50 PM CEST Breakout session

R&D Update — Simpack | Dassault Systèmes

Introduction and updates to the Simulia Simpack Multibody State of Technology SIMULIA Simpack is a comprehensive software suite designed for the development and...

Chiostro

2:50 PM - 3:05 PM CEST Breaks

Break | Coffee, Tea & Snacks

Aula 17

3:05 PM - 3:30 PM CEST Breakout session

Multibody Dynamic Analysis With Flexible Chassis Of Scooter Vehicle For High Cycle Fatigue Characterization On Rough Road Passing

This paper presents a comprehensive loads and durability analysis of a scooter's flexible chassis. The study focuses on predicting the chassis’ fatigue life...

Aula 17

3:30 PM - 3:55 PM CEST Breakout session

Simpack Automotive Wizard Database and Realtime Applications | Dassault Systèmes

The automotive database is continuously updated with additional functionality for an improved user experience. The Simpack Wizard, along with the automotive dat...

Aula 17

3:55 PM - 4:20 PM CEST Breakout session

Introducing Simpack Component for Isight | Dassault Systèmes

Isight provides designers, engineers, and researchers with an open system for integrating design and simulation models—created with various CAD, CAE, and other...

Chiostro

4:20 PM - 4:50 PM CEST Breaks

Break | Coffee, Tea & Snacks

Aula 17

4:50 PM - 5:15 PM CEST Breakout session

MBS — FEA Co-Simulation Approach Applied to a Coupled Vehicle-Tire in an Abuse Loading Application | Dassault Systèmes

Predicting the consequences of a road vehicle's tire impact against a curb is a challenging problem that can best be solved with a multi-physics simulation appr...

Aula 17

5:15 PM - 5:40 PM CEST Breakout session

Optimization of Rail Vehicle Dynamics: Steering Parameter Sensitivity and Wheel Wear Reduction via Simpack - Simulink Co-Simulation | TU Graz

Rail vehicle guidance requires balancing high-speed stability and curve negotiation, as high stiffness of the wheelset longitudinal suspension enhances stabilit...

6:05 PM - 6:15 PM CEST

End of Presentations

Rione Monti and Fori Romani

6:15 PM - 7:30 PM CEST Evening Event

Archeological Cultural Visit

Chiostro San Pietro in Vincoli

7:30 PM - 10:30 PM CEST Evening Event

Evening Reception and Buffet

Wednesday, July 2, 2025

Chiostro

9:00 AM - 9:30 AM CEST

Registration

Aula 1

9:30 AM - 4:00 PM CEST Breakout session

Track 1 | Structures

Aula 1

9:30 AM - 10:30 AM CEST Breakout session

Structures Technology Update – What’s New in Abaqus FEA | Dassault Systèmes

Abaqus is the heart of SIMULIA structural simulation. Whether submitting input files to the standalone solver from a command console, leveraging the rich scrip...

Chiostro

10:30 AM - 11:00 AM CEST Breaks

Break | Coffee, Tea & Snacks

Aula 1

11:00 AM - 11:30 AM CEST Breakout session

Structural Design & High-Impact Dynamic Simulation for Next Generation Shipbuilding | Dassault Systèmes

This presentation explores the application of digital twin technology to enhance submarine structural integrity during design and construction. Using the 3DEXPE...

Aula 1

11:30 AM - 12:15 PM CEST Breakout session

Virtual Human Modeling & Simulation | Dassault Systèmes

What if physicians and surgeons could virtually analyze their patients’ health and plan therapies and surgeries using the same advanced simulation technology t...

Aula 1

12:15 PM - 1:00 PM CEST Breakout session

Manufacturing Simulation Processes Overview | Dassault Systèmes

One of the most limiting mindsets—especially in the context of process development—is the notion: "This is how we've always done it." But are traditional approa...

Chiostro

1:00 PM - 2:00 PM CEST Breaks

Lunch Break

Aula 1

2:00 PM - 3:00 PM CEST Breakout session

Get Ready to Take off with MODSIM on the 3DEXPERIENCE platform | Dassault Systèmes

The presentation “Get Ready to Take off with MODSIM on the 3DEXPERIENCE platform” will demonstrate the unified capabilities of the 3DEXPERIENCE Platform in the...

Aula 1

3:00 PM - 4:00 PM CEST Breakout session

Real-Time Model Assembly Workflow on the 3DEXPERIENCE Platform [live demo] | Dassault Systèmes

During the design phase of a product, it is crucial to understand key behaviors such as natural frequencies or structural stiffness (e.g., bending and torsional...

Sala del Chiostro

9:30 AM - 4:00 PM CEST Breakout session

Track 2 | Electromagnetics

Sala del Chiostro

9:30 AM - 10:30 AM CEST Breakout session

R&D Update — Electromagnetics | Dassault Systèmes

This seminar will highlight some of the technology updates in major industry processes, such as antenna and microwave component engineering and aerospace commun...

Chiostro

10:30 AM - 11:00 AM CEST Breaks

Break | Coffee, Tea & Snacks

Sala del Chiostro

11:00 AM - 11:30 AM CEST Breakout session

Shielding Effectiveness Simulation | Dassault Systèmes

EMC is a critical consideration in the early design stages of electronic products. To mitigate potential risks, early-stage risk assessment methodologies must b...

Sala del Chiostro

11:30 AM - 12:00 PM CEST Breakout session

Design of System-in-Packages Mixed Signal Transitions for Space Applications | Thales Alenia Space in Italy

ASICs are highly-specific devices that are designed for a particular function, that allow the achievement of outstanding performances. However, the design and m...

Sala del Chiostro

12:00 PM - 1:00 PM CEST Breakout session

Electromagnetic and Structural simulations of PCB in a PLM Platform Environment | Dassault Systèmes

The end-to-end development of electronic products is increasingly challenged by disconnected workflows, fragmented data, and the growing complexity of systems....

Chiostro

1:00 PM - 2:00 PM CEST Breaks

Lunch Break

Sala del Chiostro

2:00 PM - 2:30 PM CEST Breakout session

SIMULIA IVCAD Suite Overview (AMCAD Engineering) | Dassault Systèmes

RF and MW communications are currently used in many fields such as 5G/6G communication systems, or space/defense equipment. Before being emitted by an antenna f...

Sala del Chiostro

2:30 PM - 3:00 PM CEST Breakout session

Hybrid Approaches for Electrically Large Structure RCS Prediction and Analysis | Leonardo SpA

Radar Cross Section (RCS) simulations represent a relevant field on aero-defense topic considering the aircraft stealth requirement. CST Studio Suite, as main t...

Sala del Chiostro

3:00 PM - 3:30 PM CEST Breakout session

Synthesis and Analysis of RF Components with WASP-NET | Dassault Systèmes

WASP-NET®, the Waveguide and Antenna Synthesis Program for NETworks, helps you achieve exceptional time savings and shorten time-to-market for your professional...

Sala del Chiostro

3:30 PM - 4:00 PM CEST Breakout session

Hybrid Solver Simulation Tip & Tricks | Dassault Systèmes

Starting from the free-space radiation performance of each antenna, the problem to predict the global installed radiation pattern, antenna to antenna coupling i...

Aula 7

9:30 AM - 4:00 PM CEST Breakout session

Track 3 | Fluids

Aula 7

9:30 AM - 10:30 AM CEST Breakout session

R&D Update — Fluids, incl. GPU & Cloud Computing | Dassault Systèmes

This session will give an overview of the latest and exciting SIMULIA R&D deliveries addressing the needs of our Fluids users. We will start with...

Chiostro

10:30 AM - 11:00 AM CEST Breaks

Break | Coffee, Tea & Snacks

Aula 7

11:00 AM - 11:30 AM CEST Breakout session

Aeroacoustic Simulation with PowerFLOW: Driving Innovation in Noise Prediction and Reduction | Dassault Systèmes

In an increasingly competitive and regulation-driven landscape, accurate aeroacoustic prediction is critical to the design and development of quieter, more effi...

Aula 7

11:30 AM - 12:00 PM CEST Breakout session

Fluid-Structure Interaction application on Wind Assisted Ship Propulsion (WASP) | Dassault Systèmes

The maritime industry is increasingly adopting Wind Assisted Propulsion (WAP) in response to international regulations, aiming to reduce energy consumption and...

Aula 7

12:00 PM - 12:30 PM CEST Breakout session

Submarine Hydrodynamics and Hydroacoustics with PowerFLOW | Dassault Systèmes

This presentation showcases advanced CFD simulations using Lattice Boltzmann methods to analyze a submarine, with and without propulsion unit. It evaluates hydr...

Aula 7

12:30 PM - 1:00 PM CEST Breakout session

A Virtual Test Lab for Designers of Medical Devices | Dassault Systèmes

Virtual testing by computer simulation is still not extensively used within the medical devices industry. While its value has been recognized, there is often a...

Chiostro

1:00 PM - 2:00 PM CEST Breaks

Lunch Break

Aula 7

2:00 PM - 3:00 PM CEST Breakout session

Workshop: End to End Automotive Workflow on 3DEXPERIENCE Cloud — a Live Demo | Dassault Systèmes

Modern automotive development demands increasingly integrated, collaborative, and efficient workflows to accelerate innovation while maintaining high fidelity i...

Aula 7

3:00 PM - 4:00 PM CEST Breakout session

Workshop: Seamless Aircraft Design Automation with PowerFLOW | Dassault Systèmes

The workshop "Seamless Aircraft Design Automation with PowerFLOW" offers an in-depth exploration of cutting-edge computational fluid dynamics (CFD) solutions, r...

Aula 17

9:30 AM - 4:00 PM CEST Breakout session

Track 4 | Multibody Dynamics

Aula 17

9:30 AM - 10:30 AM CEST Breakout session

R&D Motion — State of Technology and Vertical Roles | Dassault Systèmes

Introduction and updates to the 3DEXPERIENCE Motion portfolio using parametric and nonparametric techniques This session provides an in-depth overview of how th...

Chiostro

10:30 AM - 11:00 AM CEST Breaks

Break | Coffee, Tea & Snacks

Aula 17

11:00 AM - 12:30 PM CEST Breakout session

Hands-on: Motion Analysis Role on 3DEXPERIENCE — Live Session | Dassault Systèmes

This session is a step-by-step introduction to performing multibody system simulation on the 3DEXPERIENCE platform. High-end Motion simulation is key in order t...

Chiostro

1:00 PM - 2:00 PM CEST Breaks

Lunch Break

4:00 PM - 4:05 PM CEST

End of Conference