Tuesday, April 30, 2024
9:00 AM - 4:30 PM
EDT
Conference Only
Conference will start at 9:00 AM on Wednesday and Thursday, May 1-2, 2024.
Half Day
9:00 AM - 12:15 PM
EDT
Advanced Seminar: Materials & Mechanics
A key ingredient to successful and accurate nonlinear FE simulation is an accurate material model. This seminar will introduce the 3DEXPERIENCE Material Calibr...
Tod Dalrymple
SIMULIA R&D Material Applications Director
SIMULIA R&D Material Applications Director
9:00 AM - 12:15 PM
EDT
Advanced Seminar: Fluids
The Fluids Seminar will include: (agenda subject to change)
Reducing Vehicle Time to Market with our Fluids SolutionsMachine Learning to Enhance our Fluids Solu...
Ani Rajagopal
WW SIMULIA Fluids Industry Process Consultant
WW SIMULIA Fluids Industry Process Consultant
Debarun Das
SIMULIA Industry Process Consultant
SIMULIA Industry Process Consultant
Harikrishnan Murali
SIMULIA Industry Process Consultant
SIMULIA Industry Process Consultant
9:00 AM - 12:15 PM
EDT
Advanced Seminar: Electromechanical Systems
In this seminar, 4 workflows with a focus on Electromechanical multiphysics simulations will be presented: (agenda subject to change)
1. High Speed Connector Mo...
Dinesh Panneerselvam
Industry Process Consultant Director
Industry Process Consultant Director
Hicham Farid
SIMULIA Industry Process Consultant
SIMULIA Industry Process Consultant
9:00 AM - 12:15 PM
EDT
Advanced Seminar: Cloud, Solvers & HPC
The Cloud, Solvers & HPC Special Interest Group will include: (agenda subject to change)
Session 1: SIMULIA Solvers Performance & EfficiencyAbaqus Explicit/Stan...
9:00 AM - 4:30 PM
EDT
Advanced Seminar: Structures
The Structures Seminar will include: (agenda subject to change)
Session 1: What’s new for Concept Engineering of Structures? Concept Structure Engineering, is o...
Randall Marlow
SIMULIA Structures Industry Process Consultant Senior Expert
SIMULIA Structures Industry Process Consultant Senior Expert
Anup Iti
CATIA Industry Process Consultant - Senior Manager
CATIA Industry Process Consultant - Senior Manager
Raj Singh
CATIA industry Process Consultant Senior Manager
CATIA industry Process Consultant Senior Manager
9:00 AM - 4:30 PM
EDT
Advanced Seminar: Electromagnetics
The Electromagnetics Seminar will include: (agenda subject to change)
Session 1: CST Studio Suite and OPERA: Model Creation and Solver Basics. The two main sim...
9:00 AM - 4:30 PM
EDT
Advanced Seminar: SIMULIA Multibody System Dynamics & Motion
The Multibody Seminar will include: (agenda subject to change)
Session 1: Multibody and Motion State of Technology Session 2: Advanced Topics I – Simpack Aba...
Peng Guan
SIMULIA Multibody Systems Industry Process Consultant Specialist
SIMULIA Multibody Systems Industry Process Consultant Specialist
Binu Jose Kochucheruvil
SIMULIA Multibody Systems Industry Process Consultant
SIMULIA Multibody Systems Industry Process Consultant
Wulf Röver
SIMULIA Multibody Industry Process Consultant
SIMULIA Multibody Industry Process Consultant
Tamer Yanni
SIMULIA Multibody Systems Industry Process Consultant
SIMULIA Multibody Systems Industry Process Consultant
1:15 PM - 4:30 PM
EDT
Advanced Seminar: Automation & Optimization
Learn from Dassault Systèmes experts about the latest advances in automation and democratization of engineering processes, single- and multidiscipline design ex...
Harikrishnan Murali
SIMULIA Industry Process Consultant
SIMULIA Industry Process Consultant
1:15 PM - 4:30 PM
EDT
Advanced Seminar: Fatigue
Advanced Fatigue Algorithms in fe-safe and TCD (Theory of Critical Distance) Analysis
There are many different fatigue calculation algorithms available in fe-sa...
Jaehwan Choi
SIMULIA Structures Industry Process Consultant Senior Director
SIMULIA Structures Industry Process Consultant Senior Director
1:15 PM - 4:30 PM
EDT
Advanced Seminar: Batteries
Driving Li-Ion Battery Innovation with Multiscale Modeling and Simulation. From the Molecular Scale to the Engineering ScaleThe development of the next generati...
Matias Zielonka
SIMULIA Industry Process Consultant
SIMULIA Industry Process Consultant
Nick Reynolds
BIOVIA Industry Process Consultant Director
BIOVIA Industry Process Consultant Director
Wednesday, May 1, 2024
8:30 AM - 9:15 AM
EDT
Registration, Continental Breakfast & Sponsor Exhibit Area & 3DEXPERIENCE Playground Open
9:15 AM - 9:30 AM
EDT
Welcome & Opening Remarks, Shashank Aggarwal, Dassault Systèmes
9:30 AM - 10:00 AM
EDT
SIMULIA Brand Update, Sebastien Gautier, Dassault Systèmes
SIMULIA technology and products are at the heart of Dassault Systèmes strategy to increase the value, utility, and accessibility of virtual worlds to users and...
10:00 AM - 10:30 AM
EDT
Keynote Presentation: Achieving Large Scale Detailed Component Level Structural Simulations, Mark Taylor, The Boeing Company
Structural simulation in aerospace has progressed over decades from simple vehicle stick models, to acreage vehicle-level loads models, and now detailed compone...
Mark Taylor, The Boeing Company
FEA Development Lead
FEA Development Lead
10:30 AM - 11:00 AM
EDT
Morning Break in Sponsor Exhibit Area & 3DEXPERIENCE Playground
11:00 AM - 11:30 AM
EDT
Keynote Presentation: Battery Cell and Pack Synthesis: Simulation Leading Design, Faisal Sayeed & Saurabh Bahuguna, General Motors
Conventional design process involves creation of CAD followed by analysis and subsequent iterations. This process can be slow and leads to incremental designs....
Saurabh Bahuguna, General Motors
VDDV Global Technical Specialist, Battery Durability & Fatigue
VDDV Global Technical Specialist, Battery Durability & Fatigue
Faisal Sayeed, General Motors
Engineering Group Manager, Battery Durability & Fatigue (VDDV)
Engineering Group Manager, Battery Durability & Fatigue (VDDV)
11:30 AM - 12:00 PM
EDT
Keynote Presentation: Democratization of Simulation for Accelerated Medical Device Development, Dr. Suzanne Ferreri, BD
BD is a leading medical device company in the world committed to enhancing the safety and efficiency of clinicians' care delivery process. The company develops...
Dr. Suzanne Ferreri, BD
Director of Design and Development
Director of Design and Development
12:00 PM - 12:30 PM
EDT
SIMULIA Leadership Chat
12:30 PM - 1:40 PM
EDT
Lunch, Sponsor Exhibit Area & 3DEXPERIENCE Playground Open - Sponsored by GoEngineer
1:40 PM - 2:00 PM
EDT
Sponsor Presentations
1:40 PM - 2:00 PM
EDT
Maximizing Impact of ABAQUS, fesafe & CST Results with Smart Results Processing, Digital 3D Reporting, Visual Collaboration, and Interactive Rapid Results Reviews, Prasad Mandava, VCollab
Across all the industries, companies are increasingly relying on simulation for product development. Cost and time constraints are pushing them to cut down or e...
Prasad Mandava, VCollab
Co-Founder and CEO
Co-Founder and CEO
1:40 PM - 2:00 PM
EDT
Understanding Hexicopter Loads Tim Hunter, Wolf Star Technologies LLC
The need to understand real world loading is imperative for proper simulations. Traditional approaches may use company standards or even MBD simulations or CFD...
Tim Hunter, Wolf Star Technologies
President
President
1:40 PM - 2:00 PM
EDT
Sustainable CAE High Performance Computing Infrastructure Solutions from HPE and AMD, Tony DeVarco, HPE & Rick Knoechel, AMD
HPE and AMD share a common goal with Simulia in helping customers solve simulation challenges by delivering highly efficient, best in class high performance com...
Tony DeVarco, HPE
Director, HPC and Manufacturing Vertical
Director, HPC and Manufacturing Vertical
Rick Knoechel, AMD
Global Strategy Lead for Automotive and Discrete Manufacturing
Global Strategy Lead for Automotive and Discrete Manufacturing
2:00 PM - 2:30 PM
EDT
Structures I Track Customer Presentation TBA
2:00 PM - 2:30 PM
EDT
Heat Transfer Analysis of Spray-applied Fire Resistive Material (SFRM) protected Steel Columns Zheng (James) Peng, FM Global
We performed heat transfer analysis of Spray-applied Fire Resistive Material (SFRM) protected steel columns that are exposed to the standard ASTM E119 temperatu...
2:00 PM - 2:30 PM
EDT
Structures II Track Customer Presentations
2:00 PM - 2:30 PM
EDT
Data‒Driven and Physics-Based Analysis of Downhole Tools – Packer Application, Shobeir Pirayeh Gar, Halliburton Co.
Engineering design optimizations have been traditionally done using physics-based simulations, such as finite element analyses, where response of a system is de...
Dr. Shobeir Pirayeh Gar, Halliburton Technology Center
Technical Advisor
Technical Advisor
2:00 PM - 2:30 PM
EDT
Structures III Track Customer Presentations
2:00 PM - 2:30 PM
EDT
Abaqus User Element (UEL) Implementation of Time-Dependent Constitutive Behavior of Dielectric Elastomers, Kamalendu Ghosh, KLA Corporation
There has been increasing interest in the constitutive modeling of dielectric elastomers due to their potential in enabling new technologies such as soft roboti...
Kamalendu Ghosh, KLA
Research Scientist
Research Scientist
2:00 PM - 2:30 PM
EDT
Vibro-Acoustics Track Customer Presentations
2:00 PM - 2:30 PM
EDT
Simulation of Loudspeakers in Vehicle Audio Systems using Wave6, Wenlong Yang, General Motors Corporation
This paper describes collaborative work carried out by General Motors, Bose Corporation and Dassault Systems that is concerned with the simulation of vehicle au...
Wenlong Yang, General Motors
Noise and Vibration CAE Engineer
Noise and Vibration CAE Engineer
2:00 PM - 2:30 PM
EDT
Electromagnetics Track Customer Presentations
2:00 PM - 2:30 PM
EDT
Thermal-Mechanical + Electromagnetic Full-wave Simulation; A Multi-Physics Product Validation Workflow using Abaqus + CST, Thomas Schlitt & Clint Patton, GoEngineer
Dana is a global leader in drivetrain and e-Propulsion systems. In order to enrich their product validation process, Dana is working with GoEngineer to develop...
Clint Patton, GoEngineer
Sr. Applications Engineer, Electromagnetic
Sr. Applications Engineer, Electromagnetic
Thomas Schlitt, GoEngineer
Project Engineer, Advanced Simulations/MS Nuclear Engineering
Project Engineer, Advanced Simulations/MS Nuclear Engineering
2:00 PM - 2:30 PM
EDT
Fluids Track Customer Presentations
2:00 PM - 2:30 PM
EDT
HVAC Cooldown Simulation of a Compact Excavator Using SIMULIA PowerFLOW, Alan Perrault, Doosan Bobcat
Within the compact equipment industry, operator comfort has become an important focus. One aspect of this is the HVAC system, which allows operators to comforta...
Alan Perrault, Doosan Bobcat
Senior Simulation Engineer
Senior Simulation Engineer
2:00 PM - 2:30 PM
EDT
Modeling & Simulation Track Customer Presentations
2:00 PM - 2:30 PM
EDT
Project Gamma Advanced Analysis Features Abstract, Jason Action, Lockheed Martin Corporation
Lockheed Martin’s Advanced Development Programs’ Star Drive initiative has been advancing the integration of design and analysis tools to streamline the overall...
Jason Action, Lockheed Martin
Aeronautical Engineer
Aeronautical Engineer
2:30 PM - 3:00 PM
EDT
Structures I Track Customer Presentations
2:30 PM - 3:00 PM
EDT
Electrode Calendaring Simulation with Abaqus Explicit, Haiyan Li, General Motors Corporation
Electrode calendaring is a common compaction process used in industry. The purpose of calendaring is to reduce the porosity of the electrode which improves the...
Haiyan Li, General Motors
Global Technical Specialist
Global Technical Specialist
2:30 PM - 3:00 PM
EDT
Structures II Track Customer Presentations
2:30 PM - 3:00 PM
EDT
Design & Development of Deepwater Active Control Device (ACD) Seal Sleeves Using Abaqus Hyperelastic Simulations, Saravanan Sundaramoorthy, NOV Inc.
The Active Control Device (ACD) is a leading-edge technology in deep water non-rotating active sealing system used to seal and divert drilling fluid in the annu...
Saravanan Sundaramoorthy, NOV
Lead Elastomer Product Development and Subject Matter Expert for Managed Pressure Drilling
Lead Elastomer Product Development and Subject Matter Expert for Managed Pressure Drilling
2:30 PM - 3:00 PM
EDT
Structures III Track Customer Presentations
2:30 PM - 3:00 PM
EDT
High Strain Rate Impacts on Ultra High-Performance Concrete Using a Finite Strain HJC Concrete Model Youssef Hammi, Mississippi State University
Protective structures and other construction applications have been designed with Ultra High-Performance Concrete (UHPC) due to its exceptional strength, durabi...
Dr. Youssef Hammi, Mississippi State University
Associate Professor
Associate Professor
2:30 PM - 3:00 PM
EDT
Vibro-Acoustics Track Customer Presentations
2:30 PM - 3:00 PM
EDT
Auralization of the Sound from Microswitches Using Abaqus and Wave6 Luca Francesconi, Logitech
Microswitches are used in a wide range of products including computer mice and keyboards. In these products, the micro-switch is often designed to act as a “tac...
Dr. Luca Francesconi, Logitech Europe S.A.
2:30 PM - 3:00 PM
EDT
Electromagnetics Track Customer Presentations
2:30 PM - 3:00 PM
EDT
3D Electromagnetic Design and Mechanical Failure Analysis of Membrane Supported Antennas Operating Over 100 GHz Using CST MWS and Abaqus, Stefan Castravete, Caelynx Europe
The study was performed by Caelynx Europe and National Institute of R&D in Microtechnologies (IMT).5G devices operating up to the millimeter wave band (> 30...
Stefan Castravete, Caelynx Europe
General Manager
General Manager
2:30 PM - 3:00 PM
EDT
Fluids Track Customer Presentations
2:30 PM - 3:00 PM
EDT
Kenworth T680 Next Gen Development Using PowerFlow, Scott Temple, Kenworth Truck Company
The recent public launch of the T680 Next Gen class 8 tractor came as a result of five years of development and fine-tuning. Critical to this development cycle...
Scott Temple, Kenworth Truck Company
Aerodynamicist
Aerodynamicist
2:30 PM - 3:00 PM
EDT
Modeling & Simulation Customer Presentations
2:30 PM - 3:00 PM
EDT
Aerospace Structures Simulation Analysis Process and Data Management Kenneth Dang, The Boeing Company
Structural modeling, simulation and analysis generates a large amount of models/data during product development, production and product support. Configurational...
3:00 PM - 3:30 PM
EDT
Afternoon Break in Sponsor Exhibit Area & 3DEXPERIENCE Playground
3:30 PM - 4:00 PM
EDT
Structures I Track Customer Presentations
3:30 PM - 4:00 PM
EDT
FEA Based Level 3 Assessment of Deformed Tanks with Fluid Induced Loads, Arindam Chakraborty, VIAS3D
Fitness-for-service (FFS) of oil and gas equipment and facilities is an important engineering activity from perspective of assessing the structural integrity of...
Arindam Chakraborty, VIAS3D
CTO – Engineering Services
CTO – Engineering Services
3:30 PM - 4:00 PM
EDT
Structures II Track Customer Presentations
3:30 PM - 4:00 PM
EDT
Novel Approach to Braided Wire Stent Simulation Paul Jermihov, TriMech Solutions LLC
Braided wires are often used in medical devices, such as catheters, guidewires, and other interventional tools. These wires are designed to provide flexibility...
Paul Jermihov, TriMech Solutions LLC
3:30 PM - 4:00 PM
EDT
Structures III Track Customer Presentations
3:30 PM - 4:00 PM
EDT
Long Fiber Composite Part Performance Predictions: Using FEA and Nonlinear Anisotropic Material Models Zach Alderman & Mike Dillman, Avient Corp.
Industry trends are influencing OEMs to convert legacy metallic components to high strength composites to capture benefits such as light weighting and ease of m...
3:30 PM - 4:00 PM
EDT
Electromagnetics Track Customer Presentations
3:30 PM - 4:00 PM
EDT
Signal Integrity analysis for an eMMC memory using PCBs and Packages Module, Radu Voina, Optimal Designs
This presentation comprehensively analyzes the eMMC memory and an ARM CPU using the PCBs and Packages Module of CST Studio Suite. The study leverages two distin...
3:30 PM - 4:00 PM
EDT
Fluids Track Customer Presentations
3:30 PM - 4:00 PM
EDT
Transient Aerodynamics Simulations of a Passenger Vehicle During Deployment of Rear Spoiler Henry Tuit Farquhar, General Motors Corp.
In the context of vehicle electrification, improving vehicle aerodynamics is not only critical for efficiency and range, but also for driving experience. In ord...
3:30 PM - 4:00 PM
EDT
Modeling & Simulation Track Customer Presentations
3:30 PM - 4:00 PM
EDT
Using the Latest 3D Printing Technology to Accelerate the Digital-First Process Brent Vorst, Kinetic Vision
Kinetic Vision will present a study that demonstrates the effectiveness of a streamlined product development process that integrates computer-aided design (CAD)...
4:00 PM - 5:00 PM
EDT
SIMULIA R&D Updates
4:00 PM - 5:00 PM
EDT
Structures, Dassault Systèmes
• Introduction• Abaqus Nonlinear Mechanics• Abaqus Linear Dynamics, Solver Performance & HPC Update
4:00 PM - 5:00 PM
EDT
Multibody System Dynamics, Dassault Systèmes
Title: SIMULIA 2024 Motion Update (Power’by & Motion)Presenters: Binu Jose KOCHUCHERUVIL, Vinay KHEMKAAbstract: In this session, the significant challenges pres...
4:00 PM - 5:00 PM
EDT
Automation & Optimization, Dassault Systèmes
• Latest advances in automation and democratization of engineering processes• Single- and multidiscipline design exploration
Christina Feist
R&D Technologies MODSIM Exploration Apps Portfolio Director
R&D Technologies MODSIM Exploration Apps Portfolio Director
David Kokan
R&D Technologies Application Director
R&D Technologies Application Director
4:00 PM - 5:00 PM
EDT
Vibro-Acoustics Update, Dassault Systèmes
Noise and vibration are becoming increasingly important in virtually every industry. Typical applications include: designing for interior noise in cars, aircra...
4:00 PM - 5:00 PM
EDT
Electromagnetics, Dassault Systèmes
• 2024 release highlights• 2025 & beyond: a roadmap• Electrical Machine Design app• AI/ML for electromagnetics• Electromagnetics simulation on the 3DEXPERIENCE...
4:00 PM - 5:00 PM
EDT
Fluids Update, Dassault Systèmes
• New capabilities and release highlights
4:00 PM - 5:00 PM
EDT
Modeling & Simulation, Dassault Systèmes
• 3DEXPERIENCE platform release highlights• Stamping simulation with MODSIM• Improve packaging and sustainability with MODSIM
Ramji Kamakoti
NAM MODSIM Industry Process Consultant Director
NAM MODSIM Industry Process Consultant Director
5:00 PM - 6:30 PM
EDT
Evening Reception in Sponsor Exhibit Area & 3DEXPERIENCE Playground
Thursday, May 2, 2024
8:45 AM - 9:15 AM
EDT
Continental Breakfast & Sponsor Exhibit Area & 3DEXPERIENCE Playground Open
9:15 AM - 9:30 AM
EDT
Welcome & Opening Remarks, Shashank Aggarwal, Dassault Systèmes
9:30 AM - 10:00 AM
EDT
Transformation Through Modeling & Simulation, Ramji Kamakoti, Dassault Systèmes
MODSIM is at the heart of 3DEXPERIENCE. We will demonstrate how MODSIM is a key enabler for transformation. MODSIM enabled process’ can now reduce the times of...
Ramji Kamakoti
NAM MODSIM Industry Process Consultant Director
NAM MODSIM Industry Process Consultant Director
10:00 AM - 10:30 AM
EDT
Keynote Presentation: Powering the Future: How Can Simulation Drive Energy Transition?, Ali Marzban, NOV Inc.
The expanding global economy relies on the development of sustainable new energy sources. The solution to this challenge lies in the transition towards renewabl...
Ali Marzban, NOV
Director of Data Science and Analytics
Director of Data Science and Analytics
10:30 AM - 11:00 AM
EDT
Keynote Presentation: Virtual Testing, Simulation, and Validation: A Material Supplier's Perspective, Jameson Fee, Celanese
As a material supplier to all business segments, Celanese is constantly improving ourselves in the way we support and run our business. From internal manufactur...
Jameson Fee, Celanese
Global Manager CAE
Global Manager CAE
11:00 AM - 11:30 AM
EDT
Morning Break, Sponsor Exhibit Area & 3DEXPERIENCE Playground Open
11:30 AM - 12:00 PM
EDT
Keynote Presentation: Physics-informed Machine Learning for Engineering Applications, George Karniadakis, Brown University
Physics-informed meural networks (PINNs) and physics-informed deep neural operators, introduced in my group have been employed across all domains from molecular...
George Karniadakis, Brown University
Charles Pitts Robinson and John Palmer Barstow Professor of Applied Mathematics and Engineering
Charles Pitts Robinson and John Palmer Barstow Professor of Applied Mathematics and Engineering
12:00 PM - 12:30 PM
EDT
AI-Enhanced MODSIM for Design Exploration, Victor Oancea, Dassault Systèmes
12:30 PM - 12:50 PM
EDT
Q&A: Artificial Intelligence & Machine Learning, Brown University & Dassault Systèmes
12:50 PM - 1:50 PM
EDT
Lunch, Sponsor Exhibit Area & 3DEXPERIENCE Playground Open
1:50 PM - 2:10 PM
EDT
Sponsor Presentations
1:50 PM - 2:10 PM
EDT
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Systèmes Ecosystem, Shawn Freeman, VIAS3D
In this session, we will delve into the pivotal role of trusted partners in the context of Dassault Systemes Ecosystem, with a specific focus on VIAS3D. Beyond...
1:50 PM - 2:10 PM
EDT
Computing Tire Durability from Multibody Dynamics Simulation of Nürburgring Circuit Events, Thomas Ebbott, Endurica
A future intelligent tire application may require the tracking of damage accrual based upon the actual lived experiences of a tire. This work demonstrates such...
1:50 PM - 2:10 PM
EDT
Crossing the Line: Combining Topology Optimization, Fiber-Filled Injection Molding, and Structural Analysis, Matt Sherak, Jeff Lendermon, Shivani Patel, GoEngineer
3DEXPERIENCE integrates the powerful Tosca, SIMPOE, and Abaqus solvers in a seamless platform that once required complex workflows to combine. The speakers wil...
Shivani Patel, GoEngineer
Product Strategy – Simulation Manager
Product Strategy – Simulation Manager
Jeff Lendermon, GoEngineer
Senior Specialist
Senior Specialist
Matt Sherak, GoEngineer
Elite Application Engineer and Senior Simulation Product Specialist
Elite Application Engineer and Senior Simulation Product Specialist
2:10 PM - 2:40 PM
EDT
Structures I Track Customer Presentations
2:10 PM - 2:40 PM
EDT
Innovating Geothermal Frontiers: NOV's Technological Drive Toward Sustainable Energy Excellence Jerry Wong, NOV Inc.
Throughout its extensive history, NOV has established a remarkable legacy of pioneering innovation and technological advancements that traces its roots back to...
Jerry Wong, NOV
Senior Mechanical Engineer
Senior Mechanical Engineer
2:10 PM - 2:40 PM
EDT
Structures II Track Customer Presentations
2:10 PM - 2:40 PM
EDT
Enhancing Safety and Efficiency in Heavy Machinery: A Novel CAE-Based Approach for ANSI Multi-Impact Validation, Arshad Khan, CNH Industrial
This paper introduces an innovative approach in the field of Computer-Aided Engineering (CAE) for enhancing the safety and efficiency of heavy construction and...
Arshad Khan, CNH Industrial
Virtual Analysis Specialist
Virtual Analysis Specialist
2:10 PM - 2:40 PM
EDT
Fluids Track Customer Presentations
2:10 PM - 2:40 PM
EDT
Computational Aeroacoustics Modeling of Cold End Exhaust Sub-System, Figen Lacin, Tenneco
Tenneco is one of the world's leading designers, manufacturers, and marketers of automotive products for original equipment and aftermarket customers worldwide....
2:10 PM - 2:40 PM
EDT
Vibro-Acoustics Track Customer Presentations
2:10 PM - 2:40 PM
EDT
Using Wave6 to Optimize Acoustic Covers on Powertrain Components in Order to Reduce Radiated Noise, Ricardo De Alba Alvarez, Ford Motor Co.
Characterizing and minimizing the radiated noise from powertrain components is important for both battery electric vehicles and traditional ICE vehicles. The r...
Ricardo de Alba Alvarez, Ford Motor Company
CAE Process Lead
CAE Process Lead
2:10 PM - 2:40 PM
EDT
Modeling & Simulation Track Customer Presentations
2:10 PM - 2:40 PM
EDT
Democratization of Advanced Simulation on the 3DEXPERIENCE Platform, Thomas Feister, TriMech Solutions LLC
The Abaqus solver is a proven and reliable robust FEA solution for a variety of applications. A new interface inside of 3DEXPERENCE includes functionality that...
Tom Feister, TriMech Solutions LLC
2:10 PM - 2:40 PM
EDT
Fluids II Track Customer Presentations
2:10 PM - 2:40 PM
EDT
Correlation of PowerFLOW Soiling Simulation Results with Wind Tunnel Tests, Navid Omidvar, Rivian Automotive Inc.
The automotive industry has been increasingly focused on ensuring dependable autonomous performance, and exposure to diverse weather conditions is inevitable. R...
2:10 PM - 2:40 PM
EDT
Multibody System Dynamics Track Customer Presentations
2:10 PM - 2:40 PM
EDT
Automated Leaf Spring Suspension Modeler in Simpack, Ameya Apte, General Motors
Leaf springs are one of the primary suspension types for body on frame vehicles. They can have various configurations depending on the vehicle requirements. Fro...
Ameya Apte, General Motors
Vehicle Dynamics, Loads Prediction Analysis Engineer
Vehicle Dynamics, Loads Prediction Analysis Engineer
2:40 PM - 3:10 PM
EDT
Structures I Track Customer Presentations
2:40 PM - 3:10 PM
EDT
Fracture Mechanics Fitness-for-Service Analysis Case Studies Using Abaqus and 3D Crack Meshes, Greg Thorwald, Quest Integrity USA, LLC
When a crack is found in essential equipment two common questions are (1) will it break, and (2) when will it break? The API 579-1/ASME FFS-1 fitness-for-servic...
Greg Thorwald, Quest Integrity
Principal Engineer
Principal Engineer
2:40 PM - 3:10 PM
EDT
Structures II Track Customer Presentations TBA
2:40 PM - 3:10 PM
EDT
Simulation of Laser Shock Processing on Specimens with Abaqus and fe-safe Software Vignaud Granados, Universidad Politécnica de Guanajuato
Laser shock processing (LSP), a technique for metals strengthening, induces a compressive residual stress field which improves materials mechanical behavior mai...
Vignaud Granados Alejo, Polytechnic University of Guanajuato
Professor, Robotics Engineering Department
Professor, Robotics Engineering Department
2:40 PM - 3:10 PM
EDT
Fluids Track Customer Presentations
2:40 PM - 3:10 PM
EDT
Computational Modeling in the Advancement of Transcatheter Aortic Valve Replacement Technology, Symon Reza, Stony Brook University
Transcatheter Aortic Valve Replacement (TAVR) stands out as a primary treatment for aortic stenosis (AS), and its potential extension to lower-risk patients hig...
2:40 PM - 3:10 PM
EDT
Vibro-Acoustics Track Customer Presentations TBA
2:40 PM - 3:10 PM
EDT
Modeling Acoustic Transfer Functions in Trimmed Engine Bays Using Wave6, Chong Wang, General Motors Corp
The transmission of airborne noise from the engine bay of a vehicle to the interior cabin is an important path that affects interior noise perceived by occupant...
Chong Wang, General Motors
Senior Engineer
Senior Engineer
2:40 PM - 3:10 PM
EDT
Fluids II Track Customer Presentations
2:40 PM - 3:10 PM
EDT
Transient Snowblower Simulations in SIMULIA XFlow, Jamison Huber, Doosan Bobcat
A set multiphase transient snowblower simulations were performed using SIMULIA XFlow. Due to the wide variety of snow conditions/properties, a suitable simulati...
Jamison Huber, Doosan Bobcat
Lead Simulation Engineer
Lead Simulation Engineer
2:40 PM - 3:10 PM
EDT
Multibody System Dynamics & Motion Simulation Track Customer Presentations
2:40 PM - 3:10 PM
EDT
Leveraging MBD Models on VI-Grade Simulators, Jeff Hodgkins, VI-Grade
Automotive companies use Multi-Body Dynamic (MBD) models as part of their vehicle development process. These models have traditionally been used for primary ri...
Jeff Hodgkins, VI-grade
3:10 PM - 3:40 PM
EDT
SIMULIA Updates
3:10 PM - 3:40 PM
EDT
Structures, Dassault Systèmes
• Abaqus Contact & Constraint
Juan Hurtado
Structures Technology Director
Structures Technology Director
3:10 PM - 3:40 PM
EDT
Battery Simulation, Dassault Systèmes
• Overview of enhancements• Deterioration and aging, solid electrolytes, new elements
3:10 PM - 3:40 PM
EDT
Multiphysics, Dassault Systèmes
• Introduction to EOMYS & Manatee E-NVH software
3:10 PM - 3:40 PM
EDT
Multiscale, Dassault Systèmes
• Mean field homogenization technology• Injection molding simulation• Sequential workflow with mapping
3:10 PM - 3:40 PM
EDT
Modeling & Simulation, Dassault Systèmes
• MODSIM with SOLIDWORKS
Prabu Gokulanandam
Modeling & Simulation Senior Solution Architect
Modeling & Simulation Senior Solution Architect
3:10 PM - 3:40 PM
EDT
Fluids, Dassault Systèmes
• Latest PowerFLOW updates for 3DEXPERIENCE Cloud & GPU computing
3:10 PM - 3:40 PM
EDT
Multibody System Dynamics, Dassault Systèmes
3:40 PM - 4:00 PM
EDT
Wrap-up, Raffles & Adjourn