Speakers

As of July 2019, he serves as Country Manager at Dassault Systèmes. In this position, he is responsible for strengthening the local presence and expanding Dassault Systèmes' market position in Poland.

Ireneusz Borowski joined Dassault Systèmes in 2008 and until now, holding the position of Senior Manager Sales & Business Development Eastern Europe, he prepared business development plans for Poland, the Czech Republic, Slovakia, Hungary and managed sales in Eastern Europe. Previously, in his position as Senior Sales Manager Eastern Europe, Partner Success Management EUROCENTRAL, he managed sales in indirect channels.

Ireneusz Borowski started his professional career in 1998 at AutoR KSI, then worked as an Account Manager and Special Program Manager at CNS Solutions. In 2000, he joined Premium Technology as Product Manager and was involved at various levels of management for the next eight years.

Ireneusz Borowski is a graduate of Warsaw University of Technology, with a degree in Vehicle and Heavy Machinery Engineering.

Digital transformation expert with more than 13 years of experience in the IT industry. At Dassault Systemes, he is responsible for initiatives related to the implementation of advanced IT solutions that support manufacturing companies at every stage of the product lifecycle. He helps companies achieve higher efficiency by leveraging the potential of innovative solutions of the 3DEXPERIENCE platform.

Grzegorz CIUPKA, (MBA) began his career in 1999 in Munich as an entry-level designer at FELE on behalf of BMW in Munich.

In 2003, he joined Draexlmaier, which began expanding its design office in Poland. The first location was Jelenia Gora, followed by Dhaka in Bangladesh, and the second location in Poland was Gliwice. In all locations, electrical harness designs for the VW group were developed. Subsequently, the design offices were expanded to include plastic component design, FEM strength calculations (Jelenia Gora) and electronics and software development (Gliwice). Both locations were developed to a professional level, allowing them to function independently.

Subsequent years of professional development were associated with Maflow (development of components and climate systems in Automotive) and Aircom, which took the first steps in software development.

Currently, he is associated with Gebauer&Griller in Gliwice, where the design department and additional departments are developing, priming the position of GG Wires Spółka z o.o. in Poland. GG in Poland is growing rapidly, initially employing 13 people in the design department, with plans now to reach 60 people by 2025.

Lead design senior specialist. Member of the engineering team at Saxdor Yachts.


His work in the yacht and power boat industry has been in engineering positions for 19 years. Since the beginning, he has been working in Dassault Catia environment - previously in V5 now 3DExperience.


Currently works with external designers on new projects. He designs and systemize projects.

A professor of physics at the University of Warsaw and the National University of Singapore, leads a research group on combining relativity theory with quantum theory. Winner of scientific awards from the European Science Foundation, the Minister of Education,
Polish Science Foundation, National Science Center, Polityka weekly. Fellow at University of Oxford, worked at Imperial College London and the University of Nottingham. Author of of two books and 60 scientific articles. Winner of the Photographer of the Year title of the British magazine “Digital Camera”, nominated for the Golden Lion at the Cannes Advertising Festival. Author of photography and short films for Netflix, HBO, Channel 4, Sky TV, Playstation, Converse, Energizer, Xbox. Creator of the photographic Dragan Effect, author of exhibitions in Milan, London, Paris, Amsterdam, New York and Tokyo. Winner, grand prize of the London Fashion Film Festival, Best in Show of the British “Creative Review”, finalist of the Berlin Commercial and awards at the Golden Drum, Epica Awards, Corbis Awards, Photo Masters Cup London festivals. Author of of music videos for Quebonafide, Behemoth, Hani Rani. As a teenager, he won awards in
electronic music competitions. Never drank coffee.

Mateusz Gliszczyński leads digital transformation projects within large industrial organizations in Western and Central Europe, covering DACH and CEE regions . Mateusz heads cross-brand team responsible for product lifecycle management and data science. He has 10 years of experience in Product Lifecycle Management and over 8 years at Dassault Systemes. He previously gained experience at IMS Consutling Group, Philips Healthcare, McKinsey & Company and Boston Consulting Group.

Mateusz earned his master’s degree from Warsaw University of Technology in Poland, is a graduate of the University of Ulsan in South Korea, is a certified PMP, and holds PhD in Innovation Management.

Director of Production Preparation with 11 years of experience in managing and optimizing production processes. Expert in planning, supply chain management, implementation of innovative solutions, increasing efficiency and bringing the organization to a higher level of competitiveness.
Throughout his career with PESA Bydgoszcz SA, responsible for production planning, contract planning, product and process engineering. For the past 4 years holding the position of Production Preparation Director, he is responsible for the effective organization of production processes throughout the company, striving to continuously optimize and improve them.

Dr. Jan Kozak, Prof. of the EU, is an outstanding specialist in the field of computer science, with a wide range of scientific and research interests. His work focuses on two main areas: engineering and technical sciences, including technical computing and telecommunications, and science and life sciences, with a special emphasis on computer science.

In the area of machine learning, Dr. Jan Kozak, Prof. of the EU, is known for proposing new algorithms for learning decision trees and committees of classifiers based on decision trees. His research combines these techniques with computational intelligence, with a particular focus on anthropic algorithms, making him a pioneer in this field.

Artificial intelligence, and computational intelligence in particular, is another area in which Jan Kozak has achieved significant successes. His work is aimed at the practical application of these advanced technologies, which contributes to the development of modern solutions in various fields.

In terms of research and teaching, Jan Kozak has many years of experience working at universities, and is currently Head of the Department of Machine Learning at the University of Economics in Katowice, as well as Plenipotentiary of the Rector for the development of Computer Science and Artificial Intelligence and a member of the Council of the National Center for Nuclear Research.

He has been a manager in the aerospace and defense industry for many years. He also specializes in issues of innovation and economic competitiveness. He has many years of experience in managing both state and private sector entities, acquired, among others, at multinational corporations. He has also held important positions in public administration and business organizations.

Krzysztof Krystowski has been Northrop Grumman's General Manager for Poland since August 2023, but also serves as President of the Association of Polish Clusters and the Silesian Aviation Cluster.

In the past, he was Vice President of the Employers of Poland (the oldest employers' organization in Poland) and Vice President of the European Clusters Alliance (a pan-European organization representing more than 150,000 innovative European companies).

Krzysztof Krystowski was appointed President of the Management Board and Managing Director of PZL- Świdnik in January 2015, and from January 2016 was Vice President of Finmeccanica Helicopter Division - functions he held until the end of 2018. From 2012 to 2013, he was President of the Management Board of the Bumar Group, and later of Polski Holding Obronny. From 2006 to 2011, he worked as a manager at the Avio Group, a global aerospace company. He was also a member of the Main Council of the Polish Confederation of Private Employers Lewiatan and the National Environmental Council to the President of the Republic of Poland, as well as the Industry and Defense Council to the Minister of National Defense. From 2004 to 2006, he was Chairman of the Council of the FIRE “Innovation Center” Foundation dedicated to helping small and medium-sized innovative enterprises. From 2003 to 2006, he served as Deputy Minister in the Ministry of Economy, Labor and Social Policy (later in the Ministry of Economy and Labor). At that time, he was responsible for the competitiveness and innovativeness of the economy, supervision of research and development units and the Polish Patent Office, as well as the restructuring of the defense and aerospace industries and offsetting.

He is a graduate of the Faculty of Production Engineering at Warsaw University of Technology in the area of Production Systems Organization.

He has worked for companies such as Premium Technology, QuarticOn, Edge One Solutions, ReliaSol, among others. He has extensive experience in marketing solutions in areas such as Software and Systems Engineering, PPM, PLM, Cybersecurity and Predictive Maintenance.

At Dassault Systemes, he is responsible for relationships with key customers in the Aerospace & Defense sector.

Simulation engineer with 20 years of experience, mainly in the field of strength and fatigue life. In his current position as Global CAE Manager, he leads an international CAE team, responsible for developing its competence, ensuring the implementation of advanced simulation techniques in line with business requirements. He is responsible for overseeing simulation processes, data management and virtual development and validation of suspension systems.

A strong advocate of data-driven engineering and the democratization of CAE, he leads the development of customized applications that use FEA solutions to streamline complex engineering calculations. He manages the digitization of engineering processes, enabling the use of AI algorithms to increase efficiency in engineering workflows.

Education: PhD at Silesian University of Technology: “Weld fatigue using a local approach”. DAAD Scholarship

IT manager with many years of experience, enterprise architect, IT project manager.
Graduated with an engineering and master's degree in IT, MBA graduate. He is an experienced IT manager and specialist, responsible for standardization of the IT area and digitization of business processes. He gained experience in companies in the logistics and electric power industries, and since 2020 within the Lukasiewicz Research Network.
In his career, he has successfully carried out projects to digitize key business processes, including those based on CRM, Contact Center, workflow, WWW, RPA, Data Warehouses implementations. One of his current activities is to support the research area of the Lukasiewicz Research Network in the effective use of modern IT solutions, including those using AI.

Originator, creator and editor-in-chief of “Production Manager” magazine dedicated to decision makers and architects of leadership cultures, Industry 4.0. and digital transformation. He has been involved in the manufacturing sector for 11 years. Industry media expert. Advocate and promoter of spreading knowledge about the impact of organizations on the development of modern societies. Moderator of dozens of debates related to breakthrough technologies. Organizer and presenter of nationwide conferences (Generation 4.0., Blue Business Culture, Smart Factory World, New Horizons 22'. Completed a certified course in professional negotiation and an MBA compendium. Privately a skeptic, enthusiast of international relations and piano, fiction, philosophy and cosmology.

Ireneusz is a relentlessly performance-driven manager, working with clients to ensure smooth and successful DELMIA MOM and APS software implementations. He has more than 20 years of experience working in multidisciplinary, international environments, through which he has developed a strong interest in ensuring the highest standards of customer service and satisfaction, documenting it with impressive achievements.
Ireneusz holds degrees in Automation and Robotics from the AGH University of Science and Technology in Krakow and an MBA in Business Management from Krakow University of Technology and Central Connecticut State University. Ireneusz also holds a Six Sigma Green Belt certification and project management qualifications such as IPMA - International Project Management Association and Agile Project Management Foundation.
Ireneusz's career spans more than two decades of success in key operational areas such as quality management, engineering, manufacturing, supply chain, project management and sales.
Prior to joining Andea, Ireneusz worked for major international automotive companies: four years for Audi in Germany, nine years for Valeo in Poland, and seven years for Rupert Fertinger in Austria and Poland. He held positions such as Plant Director, Group Quality Director, Warranty Manager, Quality Manager, Project Manager and many others.

Deloitte CE consulting Partner, based in Poland, Warsaw office, with 27 years of professional experience. Krzysztof’s primary industry focus is manufacturing. Throughout his career worked in various roles, concentrated on application of the technology to excel in business, optimize and improved effectiveness of processes or as part of the business combination or separation.


In recent years primary focus on efficiency of IT and OT convergence, data driven and AI enabled digital transformation of the clients’ business leveraging technology solutions.

Olivier Ribet is in charge of developing the Europe, Middle East, Africa (EMEA) market and cross-industry corporate initiatives.


He joined Dassault Systèmes in September 2013 as Vice President, High-Tech Industry.
He was in charge of all industries until 2018.


Olivier Ribet brings over 20 years of international experience in the software, high-tech and telecom markets to Dassault Systèmes. During his career, he has led businesses and teams across Europe, North America and Asia in strategy, software engineering, marketing and business development.


Olivier Ribet spent over a decade at Microsoft, where he held senior management positions. Before this, he worked in a number of senior-level sales, marketing and business development capacities.


Olivier Ribet is a graduate of the Institute des Etudes Politiques in Bordeaux, France, and INSEAD/AIEP in Singapore.

She has been the MD of the Management Board for Central Europe at Dassault Systèmes since 2024, a world-leading company in 3D software and Virtual Twin technologies. With products like CATIA and Solidworks, the French technology company is revolutionizing key industries such as automotive, aerospace, defense, and also health & life sciences. Her career is characterized by courage and pioneering work: as the first female CEO in the Chinese automotive industry and in senior positions at Mercedes-Benz, BMW, and Hewlett-Packard, Sabine has not only significantly advanced digitalization but has also demonstrated how technology can drive change. She combines visionary ideas with practical solutions – a leader who not only focuses on innovations but also implements them. At the same time, she is a co-founder of the FemaleCIO Circle and a determined advocate for more diversity and women in leadership positions, especially in STEM fields. Her message is clear: progress requires diversity. As a supervisory board member at Messer SE and Planet First Partners, she advises companies on developing sustainable solutions based on cutting-edge technologies for the future. Her focus at Dassault Systèmes: innovations that not only change our present but also sustainably shape the future. Her motto: 'The future belongs to those who have the courage to rethink it.

He has been actively involved in the expansion of the PLM industry in Poland for more than 15 years.

Enthusiast of the subject, involved in topics both typical implementations of solutions for the automotive, aerospace and military industries and innovative proposals for the CPG, High Tech and Energy.

Currently he is responsible for support of Dassault Systemes Partners in Poland, direct service of selected Dassault Systemes Customers and development of sales in the area of new solutions and in new industry sectors.

Economist, expert in finance and trade, manager with many years of experience.

He graduated from the current Warsaw School of Economics at the Faculty of Foreign Trade. Subsequent postgraduate studies, specialized courses and internships allowed him to deepen his knowledge of financial analysis and valuation or economic aspects of the electric power sector.
He developed his career by holding management positions at Access Sp. z o.o., Rothschild Corporate Finance Polska, Nafta Polska S.A., CTL Logistics Group, among others. He was president of the Kędzierzyn-Kozielski Industrial Park, vice president of Grupa Azoty ZAK S.A. and director for Strategy, Development and Finance at the Polish Center for Testing and Certification. He was also active in supervisory boards. He chaired the Supervisory Board of Zakłady Azotowe in Tarnów-Moscice, Zakłady Azotowe Kędzierzyn and LOTOS Group.
Lukasiewicz has been with the Research Network since 2019. First, for five years as Chairman of the Council of the Institute in Łukasiewicz - ICSO “Blachownia”, and since 2024 as Vice President of the Łukasiewicz Research Network

Rafał Słomka serves as vice president and chief technology officer at Arthur Bus.
He manages a team of specialists working on the design and development of a state-of-the-art zero-emission bus for green sustainable transportation solutions of the future, where the energy source is batteries and a hydrogen fuel cell.
His mission is to develop products that accelerate the global strategy for the transition to a zero-emission future.

He is a graduate of Lublin University of Technology and Lublin University of Life Sciences.

He is passionate about technology, digital transformation and cyber security, with extensive experience using IT for business development. He has worked with the Linux Foundation to develop Cloud Native and containerization (Kubernetes) solutions. He helped enterprise clients with secure information management and business resiliency. He offered services and technologies to revolutionize the telecommunications segment (including 5G) in the country, Western Europe and the US. He successfully convinced executives for significant digital transformation projects.

After moving to Dassault Systemes, Dariusz is fascinated by the capabilities of the 3DEXPERIENCE Platform and its impact on innovation. Ensuring 'digital continuity', open communication across organizational barriers or democratizing collaboration are just some of its features. The collection and reliable management of data allows complex tasks (e.g. ModSim, virtual twin) or processes (e.g. MBSE - Model Based Systems Engineering) to be easily implemented on 3DEXPERIENCE.

Dariusz works with Transportation&Mobility and Industrial Equipment clients on projects developing their strategic competencies, supported by extended innovation and new business models.

Senior BOM and technology specialist at Saxdor Yachts, in one of the fastest growing premium boat manufacturing companies in Europe. Member of the international design team, responsible for the development of new Saxdor models, from the creation of the prototype, to the transfer of the model to series production.


Passionate about technological innovations, but only those that respond to real customer needs. An enthusiast of Desing Thinking, who believes that the best ideas are born at the interface of creativity and empathy. Each new model is not just a design, but a story where design, technology and passion come together to create something unique.

MES and CAE engineer with extensive experience in the application of numerical methods in solving engineering problems in structural mechanics, solid state mechanics and fracture mechanics. Graduate of Poznan University of Technology - PhD on numerical methods and computer modeling in biomechanics. More than 20 years of experience in numerical simulations, computer analysis of mechanical, thermal, dynamic, fatigue in many industries: automotive, energy, electronics/electrical, aerospace, construction and others. Specialist in the area of implementation and integration of CAE and HPC solutions. Linux systems administrator.

Marcel Wuwer a practicing innovator who turns complex technologies into simple, effective solutions for small and medium-sized companies. A mechanical engineer by training, he created as a researcher a system based on artificial intelligence that indicates to the designer the predicted energy consumption of the production of a part he is currently designing.

He now leads a team that designs and manufactures intralogistics systems and production automation equipment. He shortened the process of designing a control system through a digital twin, allowing automation engineers to work on a CAD model while the real device is not yet manufactured. He also improved the flow of information between manufacturing and the design department, creating an application that generated 180 requests from a 20-person manufacturing operation in six months - proof that it's the small steps in digital transformation that can have a huge impact.

Today, Marcel Wówer looks at transformation through the lens of smaller companies, where the challenge is not AI innovations, but mastering the basics of digitization. He will bring a fresh, practical perspective to the 3DEXPERIENCE Summit 2025, challenging the myth that AI and digital twins are only for corporations. His vision? Empowering Polish businesses by focusing on people and a culture of small improvements - because real change starts with people.

He is an expert in defense, aviation, security, critical infrastructure protection, crisis management systems and procedures.
From 1982 to 2000, he held various positions related to defense and security in the Polish Armed Forces. He took part in foreign missions and participated in the preparation and adaptation of the Polish Armed Forces to NATO structures.
After his military service, he gained extensive business experience through various management positions at companies such as Alcatel, L-3 Communications, SAAB, and Thales Poland. He also worked with Polish companies operating in the telecommunications, IT and security sectors - Millennium Communications SA, Noma Group, Biatel SA, MAWILUX SA, Oracle Poland.
He was a member of the team responsible for security during EURO 2012 in Poland. He worked in the team developing security systems at EURO 2012 venues (airports, stadiums and infrastructure facilities).
He has many years of experience in business development and innovation implementation in the field of defense, security and aviation, his client list includes the Polish Armed Forces, Police, Border Guard and various government institutions. In addition, he is an expert, specializing in issues related to the Technical Modernization of the Armed Forces, aviation and civil security solutions.

He is executive director, responsible for corporate business development in Poland for RTX Group (Collins Aerospace, Pratt & Whitney and Raytheon).
Currently, Mr. Zakrzewski coordinates cooperation projects with Polish defense industry partners and the Ministry of Defense for the technical modernization of the Polish Armed Forces.
He also serves as co-chairman of the Defense & Security Committee at AmCham Poland.

Szczepan Żylak has been shaping the Polish PLM systems market for more than 15 years, supporting companies in digital transformation. As Sales Director of IBS POLAND - the only platinum partner of Dassault Systèmes in Poland - he is responsible for sales strategy and implementation of modern IT solutions.
With his experience working with leading companies, he effectively helps optimize business processes and increase competitiveness. He believes that the era of 3DEXPERIENCE is redefining the industry, opening up new opportunities for growth.