CATIA User Symposium Europe - CUSE - Agenda

Tuesday, June 16, 2026

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt

8:30 AM - 9:00 AM CEST

( 2:30 AM - 3:00 AM EDT )

Registration

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Faraday

9:00 AM - 5:30 PM CEST Workshop

( 3:00 AM - 11:30 AM EDT )

Workshop 1: CATIA Creative Design Experience

In the Creative Design Experience workshop, you will learn the App Fundamentals and Basics, as well as a Deep Dive session with a Step by step approach. The Das...

9:00 AM - 11:00 AM CEST

( 3:00 AM - 5:00 AM EDT )

CATIA Creative Design Experience - Part 1

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt: FOYER

11:00 AM - 11:30 AM CEST Coffee

( 5:00 AM - 5:30 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

11:30 AM - 1:00 PM CEST

( 5:30 AM - 7:00 AM EDT )

CATIA Creative Design Experience - Part 2

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Canteen

1:00 PM - 2:00 PM CEST Lunch

( 7:00 AM - 8:00 AM EDT )

LUNCH BREAK

Enjoy a healthy lunch in our canteen.

2:00 PM - 3:30 PM CEST

( 8:00 AM - 9:30 AM EDT )

CATIA Creative Design Experience - Part 3

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt: FOYER

3:30 PM - 4:00 PM CEST Coffee

( 9:30 AM - 10:00 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

4:00 PM - 5:30 PM CEST

( 10:00 AM - 11:30 AM EDT )

CATIA Creative Design Experience - Part 4

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Edison

9:00 AM - 5:30 PM CEST Workshop

( 3:00 AM - 11:30 AM EDT )

Workshop 2: Icem Design Experience (Invitation Only)

In the ICEM Design Experience workshop, you will learn the App Fundamentals and Basics, as well as a Deep Dive session with a step by step approach. The Dassaul...

9:00 AM - 11:00 AM CEST

( 3:00 AM - 5:00 AM EDT )

ICEM Design Experience - Part 1

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt: FOYER

11:00 AM - 11:30 AM CEST Coffee

( 5:00 AM - 5:30 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

11:30 AM - 1:00 PM CEST

( 5:30 AM - 7:00 AM EDT )

ICEM Design Experience - Part 2

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Canteen

1:00 PM - 2:00 PM CEST Lunch

( 7:00 AM - 8:00 AM EDT )

LUNCH BREAK

Enjoy a healthy lunch in our canteen.

2:00 PM - 3:30 PM CEST

( 8:00 AM - 9:30 AM EDT )

ICEM Design Experience - Part 3

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt: FOYER

3:30 PM - 4:00 PM CEST Coffee

( 9:30 AM - 10:00 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

4:00 PM - 5:30 PM CEST

( 10:00 AM - 11:30 AM EDT )

ICEM Design Experience - Part 4

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Marks Ayrton

9:00 AM - 1:00 PM CEST Workshop

( 3:00 AM - 7:00 AM EDT )

Workshop 3: SysMLv2

SysML v2: In this hands-on, instructor-led session, participants will learn the key concepts of the SysML v2 modeling language and its implementation in the sys...

9:00 AM - 11:00 AM CEST

( 3:00 AM - 5:00 AM EDT )

SysMLv2 Training - Part 1

11:00 AM - 11:30 AM CEST Coffee

( 5:00 AM - 5:30 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

11:30 AM - 1:00 PM CEST

( 5:30 AM - 7:00 AM EDT )

SysMLv2 Training - Part 2

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Ampere

9:00 AM - 1:00 PM CEST Workshop

( 3:00 AM - 7:00 AM EDT )

Workshop 4: Advanced Core Mechanical Enhancement

CATIA’s next-generation core mechanical applications (Generative Shape Design Plus and Part Design Plus) introduce a new era of performance, resilience, and int...

9:00 AM - 11:00 AM CEST

( 3:00 AM - 5:00 AM EDT )

Advanced core mechanical enhancement - Part 1

11:00 AM - 11:30 AM CEST Coffee

( 5:00 AM - 5:30 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

11:30 AM - 1:00 PM CEST

( 5:30 AM - 7:00 AM EDT )

Advanced core mechanical enhancement - Part 2

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Thoma

9:00 AM - 1:00 PM CEST Workshop

( 3:00 AM - 7:00 AM EDT )

Workshop 5: Performance Driven Generative Design & Bionics

In this four-hour, hands-on workshop, participants will explore how performance-driven generative design is transforming the way engineers conceive, develop, an...

9:00 AM - 11:00 AM CEST

( 3:00 AM - 5:00 AM EDT )

Performance Driven Generative Design & Bionics - Part 1

11:00 AM - 11:30 AM CEST Coffee

( 5:00 AM - 5:30 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

11:30 AM - 1:00 PM CEST

( 5:30 AM - 7:00 AM EDT )

Performance Driven Generative Design & Bionics - Part 2

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Galvani

9:00 AM - 1:00 PM CEST Workshop

( 3:00 AM - 7:00 AM EDT )

Workshop 6: Visual Scritping

Computational design is transforming the way engineers and designers think, create, and iterate—and now, CATIA makes it easier than ever through its powerful vi...

9:00 AM - 11:00 AM CEST

( 3:00 AM - 5:00 AM EDT )

Visual Scripting - Part 1

11:00 AM - 11:30 AM CEST Coffee

( 5:00 AM - 5:30 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

11:30 AM - 1:00 PM CEST

( 5:30 AM - 7:00 AM EDT )

Visual Scripting - Part 2

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Ohm

9:00 AM - 12:45 PM CEST Workshop

( 3:00 AM - 6:45 AM EDT )

Workshop 11: Dymola for Multi-Physical System Modeling and Simulation

This workshop offers a hands-on introduction to multi-physical system simulation, with a particular focus on working with Dymola, a powerful Modelica-based mode...

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Ohm

9:00 AM - 11:00 AM CEST Workshop

( 3:00 AM - 5:00 AM EDT )

Dymola for Multi-Physical System Modeling and Simulation - Part 1

11:00 AM - 11:30 AM CEST Coffee

( 5:00 AM - 5:30 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Ohm

11:30 AM - 12:45 PM CEST Workshop

( 5:30 AM - 6:45 AM EDT )

Dymola for Multi-Physical System Modeling and Simulation - Part 2

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Canteen

1:00 PM - 2:00 PM CEST Lunch

( 7:00 AM - 8:00 AM EDT )

LUNCH BREAK

Enjoy a healthy lunch in our canteen.

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Marks Ayrton

2:00 PM - 5:30 PM CEST Workshop

( 8:00 AM - 11:30 AM EDT )

Workshop 7: Software Defined Product & Generative Systems Engineering

This workshop provides an introduction to how Generative Systems Engineering and Software Defined Product (SdP) approaches are transforming the product developm...

2:00 PM - 3:30 PM CEST

( 8:00 AM - 9:30 AM EDT )

Software Defined Product & Generative Systems Engineering - Part 1

This workshop provides an introduction to how Generative Systems Engineering and Software Defined Product (SdP) approaches are transforming the product developm...

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt: FOYER

3:30 PM - 4:00 PM CEST Coffee

( 9:30 AM - 10:00 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

4:00 PM - 5:30 PM CEST

( 10:00 AM - 11:30 AM EDT )

Software Defined Product & Generative Systems Engineering - Part 2

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Ampere

2:00 PM - 5:30 PM CEST Workshop

( 8:00 AM - 11:30 AM EDT )

Workshop 8: 3DMaster - New Layout & Capabilities

This hands-on workshop provides participants with a practical introduction to working with the new data model for 3D tolerancing and annotations in CATIA. Throu...

2:00 PM - 3:30 PM CEST

( 8:00 AM - 9:30 AM EDT )

3DMaster - New Layout & Capabilities - Part 1

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt: FOYER

3:30 PM - 4:00 PM CEST Coffee

( 9:30 AM - 10:00 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

4:00 PM - 5:30 PM CEST

( 10:00 AM - 11:30 AM EDT )

3DMaster - New Layout & Capabilities- Part 2

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Thoma

2:00 PM - 5:30 PM CEST Workshop

( 8:00 AM - 11:30 AM EDT )

Workshop 9: Working Smarter in 3DEXPERIENCE CATIA

Core mechanical applications in 3DEXPERIENCE CATIA brings a lot of new functionality, improvements in engineers’ daily work. Some of them are obvious, some of t...

2:00 PM - 3:30 PM CEST

( 8:00 AM - 9:30 AM EDT )

Working Smarter in 3DEXPERIENCE CATIA - Part 1

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt: FOYER

3:30 PM - 4:00 PM CEST Coffee

( 9:30 AM - 10:00 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

4:00 PM - 5:30 PM CEST

( 10:00 AM - 11:30 AM EDT )

Working Smarter in 3DEXPERIENCE CATIA - Part 2

Dassault Systèmes Office, Bad Nauheimer Strasse 19, 64289 Darmstadt, ROOM: Galvani

2:00 PM - 5:30 PM CEST Workshop

( 8:00 AM - 11:30 AM EDT )

Workshop 10: Visual Scripting for Engineering

This is a repetition of the morning workshop. Computational design is transforming the way engineers and designers think, create, and iterate—and now, CATIA mak...

2:00 PM - 5:30 PM CEST

( 8:00 AM - 11:30 AM EDT )

Visual Scripting for Engineering - Part 1

3:30 PM - 4:00 PM CEST Coffee

( 9:30 AM - 10:00 AM EDT )

COFFEE BREAK

Take a break and enjoy refreshing coffee and snacks.

4:00 PM - 5:30 PM CEST

( 10:00 AM - 11:30 AM EDT )

Visual Scripting for Engineering - Part 2

5:30 PM - 6:00 PM CEST

( 11:30 AM - 12:00 PM EDT )

Transfer To Darmstadtium

Darmstadtium, Schlossgraben 1, 64283 Darmstadt

6:00 PM - 10:00 PM CEST

( 12:00 PM - 4:00 PM EDT )

Evening Reception

Transfer to the Evening Reception is at 05:30 PM from the office to the Darmstadium. If you go by your own car, you will find parking opportunities at the Darms...

Wednesday, June 17, 2026

9:00 AM - 10:30 AM CEST

( 3:00 AM - 4:30 AM EDT )

PLENARY CATIA & SIMULIA

SPECTRUM A

9:00 AM - 9:15 AM CEST Plenary

( 3:00 AM - 3:15 AM EDT )

WELCOME

Join us as we open the SIMULIA RUM EuroCentral 2026 and welcome our community to Darmstadt. In this session, we set the stage for the days ahead and look forwar...

SPECTRUM A

9:15 AM - 10:00 AM CEST Plenary

( 3:15 AM - 4:00 AM EDT )

MODSIM and the Future of Industrialized AI

Using MODSIM to bring modelling and simulation intimately for your designers, we will show you how to go from 40 hours to 4 hrs to develop a product design tha...

SPECTRUM A

10:00 AM - 10:30 AM CEST Plenary

( 4:00 AM - 4:30 AM EDT )

Automated Simulation-Driven Concept Design: A Paradigm Shift demonstrated using the BMW ix3 Center Console Design

This presentation introduces a transformative approach to simulation-driven design by fully automating concept geometry workflows, addressing critical inefficie...

10:30 AM - 11:00 AM CEST Coffee

( 4:30 AM - 5:00 AM EDT )

COFFEE BREAK

SPECTRUM A

11:00 AM - 12:00 PM CEST

( 5:00 AM - 6:00 AM EDT )

Plenary CATIA

SPECTRUM A

11:00 AM - 12:00 PM CEST

( 5:00 AM - 6:00 AM EDT )

The Future Engineering

The future of engineering is intelligent, connected, and boundless. Building on CATIA's legacy as the world's premier mechanical and systems engineering platfor...

12:00 PM - 1:00 PM CEST Lunch

( 6:00 AM - 7:00 AM EDT )

LUNCH BREAK

1:00 PM - 4:45 PM CEST

( 7:00 AM - 10:45 AM EDT )

BREAKOUTS SESSIONS

Track 1: CATIA Core Engineering Track 2: Model Based Systems Engineering Track 3: CATIA MODeling & SIMulation Track 4: INFRASTRUCTURE & BUILDINGS Track 5: CATIA...

ROOM: HASSIUM

1:00 PM - 4:45 PM CEST

( 7:00 AM - 10:45 AM EDT )

Track 1: CATIA Core Engineering

Engineering complexity is increasing and is now the new baseline. Products are more advanced, regulations more demanding, competition more intense and teams mor...

Room: HASSIUM

1:00 PM - 2:30 PM CEST

( 7:00 AM - 8:30 AM EDT )

CATIA R&D | Design & Engineering AI Use cases

Generative experience and AI agent empower CATIA to increase your productivity and to unleash your creativityDiscover during this session the AI solutions for...

2:30 PM - 3:15 PM CEST Coffee

( 8:30 AM - 9:15 AM EDT )

COFFEE BREAK

3:15 PM - 3:45 PM CEST Breakout session

( 9:15 AM - 9:45 AM EDT )

Top Differentiator 3DEXPERIENCE CATIA

You will discover during this session the power of 3DEXPERIENCE CATIA showing a step forward in the CAD

3:45 PM - 4:15 PM CEST

( 9:45 AM - 10:15 AM EDT )

Engineering Connections - The Central Role of 3DEXPERIENCE CATIA in PLM

From its roots as a radio repair shop in Mannheim 80 years ago, Pepperl+Fuchs SE has grown to become a global player in the Industrial Sensors sector. Ever-incr...

4:15 PM - 4:45 PM CEST

( 10:15 AM - 10:45 AM EDT )

From Campus to Competition: Silesian Phoenix with 3DEXPERIENCE in Action

Join the Silesian Phoenix team from the Silesian University of Technology for a deep dive into the digital development of an award-winning Martian rover. This p...

ROOM: GERMANIUM

1:00 PM - 4:45 PM CEST

( 7:00 AM - 10:45 AM EDT )

Track 2: Model Based Systems Engineering

1:00 PM - 2:30 PM CEST

( 7:00 AM - 8:30 AM EDT )

Cyber Systems R&D: What's New in 2026x and What's to come (IPaas,Software Governance, SDV) - AI Use Cases in Cyber Systems

2:30 PM - 3:15 PM CEST Coffee

( 8:30 AM - 9:15 AM EDT )

COFFEE BREAK

3:15 PM - 3:45 PM CEST

( 9:15 AM - 9:45 AM EDT )

Adapting the MagicGrid Framework for SysML V2

The MagicGrid framework, a widely used model-based systems engineering (MBSE) approach, provides structured guidance for applying SysML V1 to transform stakehol...

3:45 PM - 4:15 PM CEST

( 9:45 AM - 10:15 AM EDT )

Mastering E/E & Software architecture in CATIA Magic

Discover CATIA Magic Systems Electrical/Electronics & Software Architect (EE&S), a model-based solution enabling dedicated EE&S teams to design hardware network...

4:15 PM - 4:45 PM CEST

( 10:15 AM - 10:45 AM EDT )

AD/ADAS Use Case : From MBSE to MBSi (Model based Simulation) and xIL Test & Validation Activities

The growth of products with dominating software is at the heart of innovation in automotive and other industries (avionics, aerospace) with extensive use of fun...

ROOM: RADON

1:00 PM - 4:45 PM CEST Breakout session

( 7:00 AM - 10:45 AM EDT )

Track 3: CATIA & SIMULIA - MODSIM

For years, the industry has talked about simulation-driven design, but too often that's meant juggling disconnected tools, separate modelling and simula...

1:00 PM - 1:30 PM CEST Breakout session

( 7:00 AM - 7:30 AM EDT )

Generative Design & Lattice Design

Generative engineering & Lattice design to innovate, explore, lightweight, to obtain the first time right for manufacturing.

1:30 PM - 2:00 PM CEST

( 7:30 AM - 8:00 AM EDT )

MODSIM for Electric Machines: Integrated Structural Simulation on the 3DEXPERIENCE Platform

Designing electric machines for structural durability and NVH performance requires a simulation workflow that is consistent, automated, where it is easy for sev...

2:00 PM - 2:30 PM CEST

( 8:00 AM - 8:30 AM EDT )

Truck Air Duct Development – 3DExperience MODSIM philosophy

Each additional iteration costs time— one of the most expensive item in automotive development. That’s why it is important at MANN+HUMMEL to remove the “invisib...

2:30 PM - 3:15 PM CEST Coffee

( 8:30 AM - 9:15 AM EDT )

COFFEE BREAK

3:15 PM - 3:45 PM CEST Breakout session

( 9:15 AM - 9:45 AM EDT )

Concept Structure Engineering

Concept Structure Engineeringto create robust and agile conceptual structure models including shapes, materials and fastening and to find the best-perfor...

3:45 PM - 4:15 PM CEST

( 9:45 AM - 10:15 AM EDT )

MODSIM based design exploration for multidisciplinary grab handle development

The reduction of development time while ensuring compliance with legal regulations and company-specific product requirements is a central focus of nowadays vehi...

4:15 PM - 4:45 PM CEST

( 10:15 AM - 10:45 AM EDT )

Reinforced Concrete Modelling using the 3DEXPERIENCE Platform

This presentation explores the technical implementation of reinforced concrete simulation within the 3DEXPERIENCE platform, focusing on the integration of geome...

ROOM: XENON

1:00 PM - 4:45 PM CEST

( 7:00 AM - 10:45 AM EDT )

Track 4: INFRASTRUCTURE & BUILDINGS

1:00 PM - 1:45 PM CEST

( 7:00 AM - 7:45 AM EDT )

Conceptual Design with MBSE, key starting point for an evolutive & sustainable facility

MBSE allows companies to define Facilities as sustainable, modular, adaptive systems—optimizing production, energy, carbon, cost, and performance across the ent...

1:45 PM - 2:30 PM CEST

( 7:45 AM - 8:30 AM EDT )

DC & AI Factory Engineering Firms | From Basic to Detailed Design, End to End Capabilities to Optimize Your DataCenter / AI Factory Design

From the earliest requirements to fully operational, CATIA 3DEXPERIENCE will allow Engineering firm to design production-ready systems. Data Center (DC) develop...

2:30 PM - 3:15 PM CEST Coffee

( 8:30 AM - 9:15 AM EDT )

COFFEE BREAK

3:15 PM - 4:00 PM CEST

( 9:15 AM - 10:00 AM EDT )

From IQ, OQ & PQ to Equipment Engineering (Design & Simulation) and Validation with CATIA 3DEXPERIENCE

Transform Equipment design & validation by unifying power, cooling mechanical development using a Model-Based Systems Engineering (MBSE) framework—leveraging D...

4:00 PM - 4:45 PM CEST

( 10:00 AM - 10:45 AM EDT )

Visual Scripting for Urban Planning

Intro: evolution of design practices throughout years Urban planning: implementing local economic strategies, maybe urban planning design rules In...

ROOM: ARGON

1:00 PM - 4:45 PM CEST

( 7:00 AM - 10:45 AM EDT )

Track 5: CATIA Specialized Apps

Innovating Mechanical Design with 3DEXPERIENCE CATIA – From Concept to Sustainable Production Join us for an immersive exploration of 3DEXPERIENCE CATIA in tran...

1:00 PM - 1:45 PM CEST

( 7:00 AM - 7:45 AM EDT )

Accelerate your composite design & manufacturing

Discover how CATIA’s Composites Design tools enable engineers to create lightweight, high-strength structures with advanced ply-based modeling, simulation-drive...

1:45 PM - 2:30 PM CEST

( 7:45 AM - 8:30 AM EDT )

3DEXPERIENCE CATIA Fastening- Streamline Design for Manufacturing

CATIA Fastening is a comprehensive solution within the 3DEXPERIENCE platform for designing, managing, and manufacturing fasteners in complex assemblies. It sim...

2:30 PM - 3:15 PM CEST Coffee

( 8:30 AM - 9:15 AM EDT )

COFFEE BREAK

3:15 PM - 3:45 PM CEST Breakout session

( 9:15 AM - 9:45 AM EDT )

Weight & Balance / Eco Design

In this presentation, you will discover how the new Weight & Balance and EcoDesign solutions, powered by the 3DEXPERIENCE platform, help engineers optimize prod...

3:45 PM - 4:15 PM CEST Breakout session

( 9:45 AM - 10:15 AM EDT )

Embedding Eco-Design in 3DEXPERIENCE Platform

From requirement to detailed design, eco-design must be embedded directly into design to take profit for all improvement levers and ensure a continuity from req...

4:15 PM - 4:45 PM CEST Breakout session

( 10:15 AM - 10:45 AM EDT )

Giga Casting engineering and manufacturing

Explore end-to-end the solution for giga castingand the best practice for the Body in White

ROOM: NEON

1:00 PM - 4:45 PM CEST

( 7:00 AM - 10:45 AM EDT )

Track 6: Physical System Simulation with DYMOLA

Dymola is a Modelica-based modeling and simulation tool for the development and analysis of complex multi-physical systems, typically using 0D/1D system-level r...

1:00 PM - 1:15 PM CEST

( 7:00 AM - 7:15 AM EDT )

Introduction

1:15 PM - 1:45 PM CEST

( 7:15 AM - 7:45 AM EDT )

Development of a Multi-Physical Simulation Platform for Durability Prediction for Hyundai & Kia EV

One of the most popular ways of measuring signals for various components in vehicle on durability tracks will be Road Load Data Acquisition (RLDA) which gains l...

1:45 PM - 2:30 PM CEST

( 7:45 AM - 8:30 AM EDT )

Dymola technical overview / what's new

This presentation offers a concise overview of multi-physical simulation. The first part provides a streamlined introduction to core modeling concepts using Mod...

2:30 PM - 3:15 PM CEST Coffee

( 8:30 AM - 9:15 AM EDT )

COFFEE BREAK

3:15 PM - 3:45 PM CEST

( 9:15 AM - 9:45 AM EDT )

The Bosch Experience: Driving Open Simulation Standards with Dymola and Modelica Association

At Bosch, simulation is a cornerstone of our research and development efforts. This presentation offers an inside look into how Dymola is utilized by a growing...

3:45 PM - 4:15 PM CEST

( 9:45 AM - 10:15 AM EDT )

DLR's Usage of Modelica for Space and Robotics Application

Applications in space demand for intensive simulation and optimization tasks at various stages of their design and often also during a mission. Also the requir...

4:15 PM - 4:45 PM CEST

( 10:15 AM - 10:45 AM EDT )

Customer presentation - TBD

ROOM: HELIUM

1:00 PM - 4:45 PM CEST

( 7:00 AM - 10:45 AM EDT )

Track 7: Creative Design

In this track we discover the CATIA Creative Design solutions on the 3DEXPERIENCE Platform. From the first sketch to a final, explorable concept model - We off...

1:00 PM - 2:00 PM CEST

( 7:00 AM - 8:00 AM EDT )

Rethinking Concept Car Design with CATIA 3DEXPERIENCE Discover Creative portfolio Board & Inspiration, Creative Design Experience and Visual Scripting for a unified Design workflow.

Description: In this demonstration of the creation process of a concept car we showcase the all-new unified Concept Design workflow we have on the 3DEXPERIENCE...

2:00 PM - 2:30 PM CEST

( 8:00 AM - 8:30 AM EDT )

CATIA Visual Scripting for Automotive Patterns at csi

This presentation provides insights into the practical evaluation of visual scripting in CATIA for the generation of automotive surface patterns at CSI. The aim...

2:30 PM - 3:15 PM CEST Coffee

( 8:30 AM - 9:15 AM EDT )

COFFEE BREAK

3:15 PM - 3:45 PM CEST

( 9:15 AM - 9:45 AM EDT )

Simulation for Early Design

Discover how the 3DEXPERIENCE platform accelerates product development convergence through a seamless iteration loop between design and simulation, enabling fas...

3:45 PM - 4:15 PM CEST

( 9:45 AM - 10:15 AM EDT )

InFLUX Project, when Form Follows Flow

InFLUX explores how aerodynamic performance can become part of the design process from the very beginning, instead of a constraint applied later. Through a hand...

4:15 PM - 4:45 PM CEST

( 10:15 AM - 10:45 AM EDT )

CATIA Product Experiences for Decision making

In today’s fast-paced design and engineering landscape, effective decision-making relies on immersive, real-time visualization and interactive product experienc...

ROOM: VANADIUM

1:30 PM - 4:45 PM CEST

( 7:30 AM - 10:45 AM EDT )

SIMULIA RUM Track 3: Multibody System Simulation

ROOM: VANADIUM

4:15 PM - 4:45 PM CEST

( 10:15 AM - 10:45 AM EDT )

Motion Designer

The Motion applications within the 3DEXPERIENCE platform are comprehensive solutions for designing, computing, and evaluating kinematics in complex assembly sce...

4:45 PM - 5:00 PM CEST

( 10:45 AM - 11:00 AM EDT )

MOVE TO PLENARY

ROOM: SPECTRUM A

5:00 PM - 6:00 PM CEST

( 11:00 AM - 12:00 PM EDT )

PLENARY CATIA

5:00 PM - 5:05 PM CEST

( 11:00 AM - 11:05 AM EDT )

Welcome Back

5:05 PM - 5:35 PM CEST

( 11:05 AM - 11:35 AM EDT )

Introduction of the 3DEXPERIENCE Platform – The Transformation at Volkswagen from the Perspective of Mechanical Development

Implementing a platform is one thing—transforming it into a productive tool within a vehicle project is quite another. Volkswagen is pursuing this path with unw...

5:35 PM - 6:00 PM CEST

( 11:35 AM - 12:00 PM EDT )

Closing the Loop – Design in the Era of Agentic AI

6:00 PM - 11:00 PM CEST

( 12:00 PM - 5:00 PM EDT )

EVENING RECEPTION

Thursday, June 18, 2026

ROOM: HASSIUM

8:30 AM - 3:15 PM CEST

( 2:30 AM - 9:15 AM EDT )

Track 1: CATIA Core Engineering

Engineering complexity is increasing and is now the new baseline. Products are more advanced, regulations more demanding, competition more intense and teams mor...

8:30 AM - 10:00 AM CEST Breakout session

( 2:30 AM - 4:00 AM EDT )

Modules for robust and flexible design, command intelligence

Explore the advanced modularity in detailed design thanks to the module / interfaces and the new command intelligence to increase your productivity

10:00 AM - 10:30 AM CEST Coffee

( 4:00 AM - 4:30 AM EDT )

COFFEE BREAK

10:30 AM - 11:15 AM CEST Breakout session

( 4:30 AM - 5:15 AM EDT )

Functional Tolerancing based on Mechanical Interfaces

Discover how to automatically generate optimized functional semantic tolerances avoiding hundreds of manual work from part-function description to ensure manufa...

11:15 AM - 12:00 PM CEST

( 5:15 AM - 6:00 AM EDT )

B.BRAUN / Aesculap — 3D Master Adoption: Practical Steps to Boost Efficiency

The adoption of 3D Master within the 3DEXPERIENCE platform represents a significant shift from traditional file-based, 2D drawing-centric design processes towar...

12:00 PM - 1:30 PM CEST Lunch

( 6:00 AM - 7:30 AM EDT )

LUNCH BREAK

1:30 PM - 2:30 PM CEST

( 7:30 AM - 8:30 AM EDT )

Visual Scripting for Engineering

Algorythmic design is transforming the way engineers and designers think, create, and iterate—and now, CATIA makes it easier than ever through its powerful visu...

2:30 PM - 3:15 PM CEST

( 8:30 AM - 9:15 AM EDT )

Automation, Templates and Rules Designer

Algorythmic design is transforming the way engineers and designers think, create, and iterate—and now, CATIA makes it easier than ever through its powerful visu...

ROOM: GERMANIUM

8:30 AM - 3:00 PM CEST

( 2:30 AM - 9:00 AM EDT )

Track 2: Model Based Systems Engineering

8:30 AM - 9:00 AM CEST

( 2:30 AM - 3:00 AM EDT )

Large-Scale MBSE in practice; standardisation on an industrial level

Fully utilizing the powers of MBSE or achieving an entry level adoption, in large, defence or other development programs is anything but straightforward. This p...

9:00 AM - 9:45 AM CEST

( 3:00 AM - 3:45 AM EDT )

Risk Management with 3DEXPERIENCE and CATIA Magic

This session introduces a model-based approach to safety engineering on the 3DEXPERIENCE platform, focusing on integrated D-FMEA and P-FMEA workflows within CAT...

9:45 AM - 10:30 AM CEST Coffee

( 3:45 AM - 4:30 AM EDT )

COFFEE BREAK

10:30 AM - 11:00 AM CEST

( 4:30 AM - 5:00 AM EDT )

A handful of modelers: end-to-end MBSE as a dense information core in fast-paced, non-traditional project environments

Model-based systems engineering is most often discussed in the context of large programs — aerospace, defence, automotive — where dedicated engineering organisa...

11:00 AM - 11:30 AM CEST

( 5:00 AM - 5:30 AM EDT )

MBSE Extension – Integrating Safety, Security, and IPS into MBSE Methodologies

Model-Based Systems Engineering (MBSE) has become an established approach for handling the complexity of modern defense systems. By replacing document-centric s...

11:30 AM - 12:00 PM CEST

( 5:30 AM - 6:00 AM EDT )

CONOPS - Optimizing Business Strategies in Advanced Air Mobility

“Advanced Air Mobility (AAM) is more than just flying taxis—it’s a complex system of systems that requires careful planning and collaboration to succeed. In thi...

12:00 PM - 1:30 PM CEST Lunch

( 6:00 AM - 7:30 AM EDT )

LUNCH BREAK

Germanium

1:30 PM - 2:00 PM CEST Breakout session

( 7:30 AM - 8:00 AM EDT )

No System Left Behind: Integrating Your Existing PLM Investments with 3DEXPERIENCE

Most organizations adopting 3DEXPERIENCE face the same hard truth: legacy PLM systems do not disappear overnight. PROSTEP's OpenPDM platform closes that gap. Us...

2:00 PM - 2:30 PM CEST

( 8:00 AM - 8:30 AM EDT )

Digital Engineering and virtual validation based on Dassault Systèmes solutions

In the context of increasing system complexity and shorter development cycles, digital engineering and virtual validation have become key enablers for efficient...

ROOM: RADON

8:30 AM - 3:15 PM CEST

( 2:30 AM - 9:15 AM EDT )

Track 3: CATIA MODeling and SIMulation

8:30 AM - 9:00 AM CEST Breakout session

( 2:30 AM - 3:00 AM EDT )

MODSIM in Core mechanical engineering

The democratization of simulation using the advanced modeling tecnologies driving higher MODSIM flexibility

9:00 AM - 9:30 AM CEST

( 3:00 AM - 3:30 AM EDT )

From parametric cushion model to digital twin

Model-Based Systems Engineering and MODSIM approaches are key enablers for managing the growing complexity of automotive safety systems. In airbag cushion devel...

9:30 AM - 10:00 AM CEST

( 3:30 AM - 4:00 AM EDT )

Empowering Engineers: Streamlined, Simulation-Driven Battery Cell Housing Design on the 3DEXPERIENCE Platform at BMW

In the fast-evolving field of electro-mobility, rapid and robust battery component development is critical. At BMW in Munich, our team established a standardize...

10:00 AM - 10:30 AM CEST Coffee

( 4:00 AM - 4:30 AM EDT )

COFFEE BREAK

10:30 AM - 11:30 AM CEST Breakout session

( 4:30 AM - 5:30 AM EDT )

Stamping Die engineering

Stamping die engineering to reduce the number of physical prototypes by anticipating manufacturability of stamping die process.

11:30 AM - 12:00 PM CEST

( 5:30 AM - 6:00 AM EDT )

Digital Continuity at Scale in Airbus Helicopters: 3DEXPERIENCE as collaborative platform to enable transformation of simulation metiers

In today’s aerospace industry, achieving digital continuity is the key to managing complex systems. This presentation outlines the transition toward a Digital T...

12:00 PM - 1:30 PM CEST Lunch

( 6:00 AM - 7:30 AM EDT )

LUNCH BREAK

ROOM: XENON

8:30 AM - 3:15 PM CEST

( 2:30 AM - 9:15 AM EDT )

Track 4: Electrical & Fluid Engineering

Smart systems embedding multidiscipline engineering are becoming more and more challenging to design, produce and maintain! Ensuring end to end traceability, ma...

8:30 AM - 8:45 AM CEST

( 2:30 AM - 2:45 AM EDT )

Introduction

8:45 AM - 10:00 AM CEST

( 2:45 AM - 4:00 AM EDT )

R&D Outlook: New Electrical roadmap EE update Electrotechnical solution

New Electrical roadmap, EE update, Electrotechnical solution

10:00 AM - 10:30 AM CEST Coffee

( 4:00 AM - 4:30 AM EDT )

COFFEE BREAK

10:30 AM - 11:15 AM CEST

( 4:30 AM - 5:15 AM EDT )

Wiring Harness 3D Design & Manufacturing Live Demo

CATIA Electrical expert will give you an overview of CATIA integrated electrical harness design and manufacturing process. Dassault Systèmes ‘s electrical offer...

11:15 AM - 12:00 PM CEST

( 5:15 AM - 6:00 AM EDT )

Fluidic Design from Engineering to Operations Live Demo

The objective of this demonstration is to provide an overview of the 3DEXPERIENCE CATIA capability in the context of Hydraulic system engineering. We will see h...

12:00 PM - 1:30 PM CEST Lunch

( 6:00 AM - 7:30 AM EDT )

LUNCH BREAK

1:30 PM - 2:00 PM CEST

( 7:30 AM - 8:00 AM EDT )

Customer presentation - TBD

ROOM: NEON

8:30 AM - 3:15 PM CEST

( 2:30 AM - 9:15 AM EDT )

Track 6: MBSE

8:30 AM - 9:00 AM CEST

( 2:30 AM - 3:00 AM EDT )

AI Assisted MBSE using SysML v2 and CATIA Magic 2026x OOSE (C&SI)

Generative AI is emerging as an accelerator for SysML v2 modeling when deliberately embedded as an assistance system within the MBSE workflow. This work demonst...

9:00 AM - 9:30 AM CEST

( 3:00 AM - 3:30 AM EDT )

Application of Model-Based Systems Engineering in the development of the Einstein Telescope

For the advancement in gravitational wave astronomy a new generation of observatories for the detection of gravitational waves (GW), ripples in space-time, is n...

9:30 AM - 10:00 AM CEST

( 3:30 AM - 4:00 AM EDT )

Modelling ESA’s multi-mission flight operation systems with Cameo System Modeler

At the European Space Operations Centre (ESOC) of the European Space Agency (ESA) space mission ground segments are currently designed by relying on a common ar...

10:00 AM - 10:30 AM CEST Coffee

( 4:00 AM - 4:30 AM EDT )

COFFEE BREAK

10:30 AM - 11:00 AM CEST

( 4:30 AM - 5:00 AM EDT )

Extended MagicGrid: From Abstraction to Precision From SysML to Embedded System Detailed Design and Testing

In this presentation, we focus on software-intensive systems with mission-critical software design, as these demand that models be both integrated and consisten...

11:00 AM - 11:30 AM CEST

( 5:00 AM - 5:30 AM EDT )

MBSE Transformation at Grundfos

Model-Based Systems Engineering (MBSE) is widely recognized as a key enabler for managing complexity, improving quality, and accelerating development. Yet many...

11:30 AM - 12:00 PM CEST

( 5:30 AM - 6:00 AM EDT )

Bridging the Gap between System Engineering and Software Design

How do you turn system models into working software without losing intent along the way? As system complexity continues to grow, maintaining consistency between...

12:00 PM - 1:30 PM CEST Lunch

( 6:00 AM - 7:30 AM EDT )

LUNCH BREAK

1:30 PM - 2:00 PM CEST

( 7:30 AM - 8:00 AM EDT )

An MBSE/UAF Approach to Managing Complex Industrial Enterprise Architectures

Large capital-intensive industrial enterprises, including mining and process industries, must plan long-term transformation under strict technical, economic, en...

2:00 PM - 2:30 PM CEST

( 8:00 AM - 8:30 AM EDT )

Artificial Intelligence & SysML v2 as the Backbone of Generative MBSE Architectures

Model-Based Systems Engineering (MBSE) is increasingly used to manage the complexity of modern systems, and SysML v2 provides a more expressive, precise, and au...

2:30 PM - 3:00 PM CEST

( 8:30 AM - 9:00 AM EDT )

MBSE and Fluid Systems Analysis Models Integration

When developing complex fluid systems, continuous improvement in communication between system engineers and fluid systems designers/analysts is required. Often,...

ROOM: HELIUM

8:30 AM - 3:15 PM CEST

( 2:30 AM - 9:15 AM EDT )

Track 7: Design for Engineering Innovation

8:30 AM - 8:45 AM CEST

( 2:30 AM - 2:45 AM EDT )

ICEM Surf What's New

Discover the latest ICEM Surf 2026 enhancements, and get some hints on what to expect in ICEM Surf 2027

8:45 AM - 9:25 AM CEST

( 2:45 AM - 3:25 AM EDT )

ICEM Design Experience for Motorsport Surfacing

Revealing his latest GP1 Hypercar, CATIA Champion Angel Guerra will share how he used ICEM Surf to design this stunning vehicle, and CATIA Live Rendering with P...

9:25 AM - 10:05 AM CEST

( 3:25 AM - 4:05 AM EDT )

ICEM Design Experience for Motorsport

Daniel Vass, renowned motorsport surfacing expert, will reveal his exciting Origin Zero project (I forget what you used here) and share how he uses ICEM Design...

10:00 AM - 10:30 AM CEST Coffee

( 4:00 AM - 4:30 AM EDT )

COFFEE BREAK

10:30 AM - 11:00 AM CEST

( 4:30 AM - 5:00 AM EDT )

ICEM Design Experience - Latest news and methods

11:00 AM - 11:30 AM CEST

( 5:00 AM - 5:30 AM EDT )

Design to Engineering Workflow within 3DEXPERIENCE

Breaking the silo between design studios and engineering departments by enabling seamless collaboration, faster decision-making, and efficient convergence towar...

11:30 AM - 12:00 PM CEST

( 5:30 AM - 6:00 AM EDT )

Light Design and Validation Innovation with 3DEXPERIENCE

We present a collaborative lighting design workflow for 3D modeling and optical design, simulation, analysis, and final validation. This workflow has been enabl...

12:00 PM - 1:30 PM CEST Lunch

( 6:00 AM - 7:30 AM EDT )

LUNCH BREAK

1:30 PM - 2:00 PM CEST

( 7:30 AM - 8:00 AM EDT )

Advanced Visualization & Validation

In this session discover how CATIA V+R Product Experience capabilities address advanced visualization and experience use cases for product development, validati...

2:00 PM - 2:30 PM CEST

( 8:00 AM - 8:30 AM EDT )

Immersive Experience for Design & Engineering

ROOM: ARGON

1:30 PM - 2:30 PM CEST

( 7:30 AM - 8:30 AM EDT )

Track 5: CATIA Specialized Apps

Innovating Mechanical Design with 3DEXPERIENCE CATIA – From Concept to Sustainable Production Join us for an immersive exploration of 3DEXPERIENCE CATIA in tran...

1:30 PM - 2:30 PM CEST Breakout session

( 7:30 AM - 8:30 AM EDT )

Reverse Engineering with Regeanerative Mechanical part

Unlock the power of Reverse Engineering with CATIA 3DEXEPERIENCE Learn how to convert physical parts into precise CAD models, enabling rapid iteration and...

3:15 PM - 3:20 PM CEST

( 9:15 AM - 9:20 AM EDT )

END OF THE EVENT : THANK YOU !